Добавил:
Опубликованный материал нарушает ваши авторские права? Сообщите нам.
Вуз: Предмет: Файл:
Тексты / 3 / A little bit of physics.doc
Скачиваний:
194
Добавлен:
02.05.2014
Размер:
334.34 Кб
Скачать

Resistor

Resistor, component of an electric circuit that resists the flow of direct or alternating electric current. Resistors can limit or divide the current, reduce the voltage, protect an electric circuit, or provide large amounts of heat or light.

An electric current is the movement of charged particles called electrons from one region to another. The amount of resistance to the flow of current that a resistor causes depends on the material it is made of as well as its size and shape. Resistors are usually placed in electric circuits, which are devices formed when current moves through an electrical conductor (a material that allows the current to flow without much resistance, such as copper wire) and when the conductor makes a complete loop.

When a voltage, or electric potential, is applied to opposite ends of a circuit, it causes current to flow through the circuit. As the current flows, it encounters a certain amount of resistance from the conductor and any resistors in the circuit. Each material has a characteristic resistance. For example, wood is a bad conductor because it offers high resistance to the current; copper is a better conductor because it offers less resistance. In any electric circuit, the current in the entire circuit is equal to the voltage across that circuit divided by the resistance of the circuit. Resistors are often made to have a specific value of resistance so that the characteristics of the circuit can be accurately calculated.

Physicists sometimes explain the flow of current through a material, such as a resistor, by comparing it to water flowing through a pipe. A pressure difference maintained across two ends of the pipe by a pump is like the potential difference, or voltage, across a wire maintained by a battery. The rate of flow of water, analogous to the rate of flow of charge (current), depends on the type of pipe used. A long and thin water pipe offers more resistance than a short and thick one or a pipe that has obstructions. Similarly, the resistance of a conductor is dependent upon several factors, including its length, cross section, temperature, and a property called resistivity. Resistivity is an intrinsic characteristic of the material itself defined by the voltage divided by the density of current (current per unit cross section area) flowing across the material.

A material of high resistivity will require a higher electrical field to cause a given current density. If the resistivity of a material is known, as well as its dimensions, it can be used to calculate the resistance of a particular piece of material. The resistivity of a material is also dependent upon temperature. When a material resists the flow of current, it converts the electrical energy into other kinds of energy such as heat and light. This energy causes resistors to heat up and glow when enough current flows through them.

Resistors are designed to have a specific value of resistance. Most resistors used in electric circuits are cylindrical items a few millimeters long with wires at both ends to connect them to the circuit. Resistors are often color coded by three or four color bands that indicate the specific value of resistance. Some resistors obey Ohm’s law, which states that the current density is directly proportional to the electrical field when the temperature is constant. The resistance of a material that follows Ohm’s law is constant, or independent of voltage or current, and the relationship between current and voltage is linear. Modern electronic circuits depend on many devices that deviate from Ohm’s law. In devices such as diodes, the current does not increase linearly with voltage and is different for two directions of current.

Resistors can help divide voltages, and when combined with other elements can help convert voltages for a specific electrical design. Resistors can also be used to provide intense light or heat. For example, the heating element in a household cooking range is a resistor, as is the tungsten filament in a common incandescent lamp. Resistors with adjustable resistance are called rheostats or potentiometers. These types of resistors are used in appliances when the current needs to be adjusted or when the resistance needs to be varied, as with lights that dim or adjustable generators.

Electric Furnace

Electric Furnace, electrically heated device used industrially for melting metals or firing ceramics. It is also known as an electrothermic furnace.

The simplest type of electric furnace is the resistance furnace, in which heat is generated by passing a current through a resistance element surrounding the furnace or by utilizing the resistance of the material being heated. The heating element in an externally heated furnace may take the form of a coil of metal wire wound around a tube of refractory material or it may be a tube of metal or other resistive material such as carborundum. Resistance furnaces are particularly useful in applications in which a small furnace, with precisely controlled temperatures, is needed. Small resistance furnaces are widely used in laboratories and in shops for the heat treatment of tools. Larger furnaces are used for firing ceramics and melting brass. The highest temperature at which resistance furnaces are operated, for example, in the manufacture of graphite, is in the neighborhood of 4100° C (7366° F).

The electric-arc furnace is the most widely used type of electric furnace for the production of quality alloy steels and range in capacity from 227 kg (500 lb) to 181 metric tons. In these furnaces the heat is generated by an arc struck between the metal being heated and one or more electrodes suspended above the metal. A typical form of arc furnace has three electrodes, fed by a three-phase power supply, giving three heating arcs. The electrodes are made either of graphite or of carbon.

A more recently developed type of electric furnace is the induction furnace, consisting of a crucible in which a metallic charge is heated by eddy currents induced magnetically. Around the crucible is wound a coil through which high-frequency alternating currents are passed. The magnetic field of this coil sets up eddy currents in the metal in the crucible. Induction furnaces have a number of advantages, chief among them being the speed at which metal can be melted. At comparatively low frequencies the induced eddy currents exert a stirring action on the molten metal. Because the higher frequencies are the most effective for heating, some induction furnaces have two coils, one for high-frequency current and one for low-frequency. The earlier types of induction furnaces operated at frequencies between 60 and 60,000 cycles per second, but some modern furnaces are designed to use frequencies of 1 million cycles or more per second.

A special type of furnace, called an electrolytic furnace, is used in the production of aluminum, magnesium, and sodium. In the electrolytic furnace, a salt is fused by the heat generated by the passage of a large electric current and is at the same time electrolyzed so that the pure metal is deposited at one electrode.

Insulation

INTRODUCTION

Insulation, any material that is a poor conductor of heat or electricity, and that is used to suppress the flow of heat or electricity.

ELECTRIC INSULATION

The perfect insulator for electrical applications would be a material that is absolutely nonconducting; such a material does not exist. The materials used as insulators, although they do conduct some electricity, have a resistance to the flow of electric current as much as 2.5 × 1024 greater than that of good electrical conductors such as silver and copper. Materials that are good conductors have a large number of free electrons (electrons not tightly bound to atoms) available to carry the current; good insulators have few such electrons. Some materials such as silicon and germanium, which have a limited number of free electrons, are semiconductors and form the basic material of transistors.

In ordinary electric wiring, plastics are commonly used as insulating sheathing for the wire itself. Very fine wire, such as that used for the winding of coils and transformers, may be insulated with a thin coat of enamel. The internal insulation of electric equipment may be made of mica or glass fibers with a plastic binder. Electronic equipment and transformers may also use a special electrical grade of paper. High-voltage power lines are insulated with units made of porcelain or other ceramic, or of glass.

The specific choice of an insulation material is usually determined by its application. Polyethylene and polystyrene are used in high-frequency applications, and mylar is used for electrical capacitors. Insulators must also be selected according to the maximum temperature they will encounter. Teflon is used in the high-temperature range of 175° to 230° C (350° to 450° F). Adverse mechanical or chemical conditions may call for other materials. Nylon has excellent abrasion resistance, and neoprene, silicone rubber, epoxy polyesters, and polyurethanes can provide protection against chemicals and moisture.

THERMAL INSULATION

Thermal insulating materials are used to reduce the flow of heat between hot and cold regions. The sheathing often placed around steam and hot-water pipes, for instance, reduces heat loss to the surroundings, and insulation placed in the walls of a refrigerator reduces heat flow into the unit and permits it to stay cold.

Thermal insulation may have to fulfill one or more of three functions: to reduce thermal conduction in the material where heat is transferred by molecular or electronic action; to reduce thermal convection currents, which can be set up in air or liquid spaces; and to reduce radiation heat transfer where thermal energy is transported by electromagnetic waves. Conduction and convection can be suppressed in a vacuum, where radiation becomes the only method of transferring heat. If the surfaces are made highly reflective, radiation can also be reduced. Thus, thin aluminum foil can be used in building walls, and reflecting metal on roofs minimizes the heating effect of the sun. Thermos bottles or Dewar flasks (see Cryogenics) provide insulation through an evacuated double-wall arrangement in which the walls have reflective silver or aluminum coatings. See also Heat Transfer.

Air offers resistance to heat flow at a rate about 15,000 times higher than that of a good thermal conductor such as silver, and about 30 times higher than that of glass. Typical insulating materials, therefore, are usually made of nonmetallic materials and are filled with small air pockets. They include magnesium carbonate, cork, felt, cotton batting, rock or glass wool, and diatomaceous earth. Asbestos was once widely used for insulation, but it has been found to be a health hazard and has, therefore, been banned in new construction in the U.S.

In building materials, air pockets provide additional insulation in hollow glass bricks, insulating or thermopane glass (two or three sealed glass panes with a thin air space between them), and partially hollow concrete tile. Insulating properties are reduced if the air space becomes large enough to allow thermal convection, or if moisture seeps in and acts as a conductor. The insulating property of dry clothing, for example, is the result of air entrapped between the fibers; this ability to insulate can be significantly reduced by moisture.

Home-heating and air-conditioning costs can be reduced by proper building insulation. In cold climates about 8 cm (about 3 in) of wall insulation and about 15 to 23 cm (about 6 to 9 in) of ceiling insulation are recommended. The effective resistance to heat flow is conventionally expressed by its R-value (resistance value), which should be about 11 for wall and 19 to 31 for ceiling insulation.

Superinsulation has been recently developed, primarily for use in space, where protection is needed against external temperatures near absolute zero. Superinsulation fabric consists of multiple sheets of aluminized mylar, each about 0.005 cm (about 0.002 in) thick, and separated by thin spacers with about 20 to 40 layers per cm (about 50 to 100 layers per in).

Ceramics

Introduction

Ceramics (Greek keramos, "potter's clay"), originally the art of making pottery, now a general term for the science of manufacturing articles prepared from pliable, earthy materials that are made rigid by exposure to heat. Ceramic materials are nonmetallic, inorganic compounds—primarily compounds of oxygen, but also compounds of carbon, nitrogen, boron, and silicon. Ceramics includes the manufacture of earthenware, porcelain, bricks, and some kinds of tile and stoneware.

Ceramic products are used not only for artistic objects and tableware, but also for industrial and technical items, such as sewer pipe and electrical insulators. Ceramic insulators have a wide range of electrical properties. The electrical properties of a recently discovered family of ceramics based on a copper-oxide mixture allow these ceramics to become superconductive, or to conduct electricity with no resistance, at temperatures much higher than those at which metals do. In space technology, ceramic materials are used to make components for space vehicles.

The rest of this article will deal only with ceramic products that have industrial or technical applications. Such products are known as industrial ceramics. The term industrial ceramics also refers to the science and technology of developing and manufacturing such products.

PROPERTIES

Ceramics possess chemical, mechanical, physical, thermal, electrical, and magnetic properties that distinguish them from other materials, such as metals and plastics. Manufacturers customize the properties of ceramics by controlling the type and amount of the materials used to make them.

Chemical Properties

Industrial ceramics are primarily oxides (compounds of oxygen), but some are carbides (compounds of carbon and heavy metals), nitrides (compounds of nitrogen), borides (compounds of boron), and silicides (compounds of silicon). For example, aluminum oxide can be the main ingredient of a ceramic—the important alumina ceramics contain 85 to 99 percent aluminum oxide. Primary components, such as the oxides, can also be chemically combined to form complex compounds that are the main ingredient of a ceramic. Examples of such complex compounds are barium titanate (BaTiO3) and zinc ferrite (ZnFe2O4). Another material that may be regarded as a ceramic is the element carbon (in the form of diamond or graphite).

Ceramics are more resistant to corrosion than plastics and metals are. Ceramics generally do not react with most liquids, gases, alkalies, and acids. Most ceramics have very high melting points, and certain ceramics can be used up to temperatures approaching their melting points. Ceramics also remain stable over long time periods.

Mechanical Properties

Ceramics are extremely strong, showing considerable stiffness under compression and bending. Bend strength, the amount of pressure required to bend a material, is often used to determine the strength of a ceramic. One of the strongest ceramics, zirconium dioxide, has a bend strength similar to that of steel. Zirconias (ZrO2) retain their strength up to temperatures of 900° C (1652° F), while silicon carbides and silicon nitrides retain their strength up to temperatures of 1400° C (2552° F). These silicon materials are used in high-temperature applications, such as to make parts for gas-turbine engines. Although ceramics are strong, temperature-resistant, and resilient, these materials are brittle and may break when dropped or when quickly heated and cooled.

Physical Properties

Most industrial ceramics are compounds of oxygen, carbon, or nitrogen with lighter metals or semimetals. Thus, ceramics are less dense than most metals. As a result, a light ceramic part may be just as strong as a heavier metal part. Ceramics are also extremely hard, resisting wear and abrasion. The hardest known substance is diamond, followed by boron nitride in cubic-crystal form. Aluminum oxide and silicon carbide are also extremely hard materials and are often used to cut, grind, sand, and polish metals and other hard materials.

Thermal Properties

Most ceramics have high melting points, meaning that even at high temperatures, these materials resist deformation and retain strength under pressure. Silicon carbide and silicon nitride, for example, withstand temperature changes better than most metals do. Large and sudden changes in temperature, however, can weaken ceramics. Materials that undergo less expansion or contraction per degree of temperature change can withstand sudden changes in temperature better than materials that undergo greater deformation. Silicon carbide and silicon nitride expand and contract less during temperature changes than most other ceramics do. These materials are therefore often used to make parts, such as turbine rotors used in jet engines, that can withstand extreme variations in temperature.

Electrical Properties

Certain ceramics conduct electricity. Chromium dioxide, for example, conducts electricity as well as most metals do. Other ceramics, such as silicon carbide, do not conduct electricity as well, but may still act as semiconductors. (A semiconductor is a material with greater electrical conductivity than an insulator has but with less than that of a good conductor.) Other types of ceramics, such as aluminum oxide, do not conduct electricity at all. These ceramics are used as insulators—devices used to separate elements in an electrical circuit to keep the current on the desired pathway. Certain ceramics, such as porcelain, act as insulators at lower temperatures but conduct electricity at higher temperatures.

Magnetic Properties

Ceramics containing iron oxide (Fe2O3) can have magnetic properties similar to those of iron, nickel, and cobalt magnets (see Magnetism). These iron oxide-based ceramics are called ferrites. Other magnetic ceramics include oxides of nickel, manganese, and barium. Ceramic magnets, used in electric motors and electronic circuits, can be manufactured with high resistance to demagnetization. When electrons become highly aligned, as they do in ceramic magnets, they create a powerful magnetic field which is more difficult to disrupt (demagnetize) by breaking the alignment of the electrons.

MANUFACTURE

Industrial ceramics are produced from powders that have been tightly squeezed and then heated to high temperatures. Traditional ceramics, such as porcelain, tiles, and pottery, are formed from powders made from minerals such as clay, talc, silica, and feldspar. Most industrial ceramics, however, are formed from highly pure powders of specialty chemicals such as silicon carbide, alumina, and barium titanate.

The minerals used to make ceramics are dug from the earth and are then crushed and ground into fine powder. Manufacturers often purify this powder by mixing it in solution and allowing a chemical precipitate (a uniform solid that forms within a solution) to form. The precipitate is then separated from the solution, and the powder is heated to drive off impurities, including water. The result is typically a highly pure powder with particle sizes of about 1 micrometer (a micrometer is 0.000001 meter, or 0.00004 in).

Molding

After purification, small amounts of wax are often added to bind the ceramic powder and make it more workable. Plastics may also be added to the powder to give the desired pliability and softness. The powder can then be shaped into different objects by various molding processes. These molding processes include slip casting, pressure casting, injection molding, and extrusion. After the ceramic is molded, it is heated in a process known as densification to make the material stronger and more dense.

Slip Casting

Slip casting is a molding process used to form hollow ceramic objects. The ceramic powder is poured into a mold that has porous walls, and then the mold is filled with water. The capillary action (forces created by surface tension and by wetting the sides of a tube) of the porous walls drains water through the powder and the mold, leaving a solid layer of ceramic inside.

Pressure Casting

In pressure casting, ceramic powder is poured into a mold, and pressure is then applied to the powder. The pressure condenses the powder into a solid layer of ceramic that is shaped to the inside of the mold.

Injection Molding

Injection molding is used to make small, intricate objects. This method uses a piston to force the ceramic powder through a heated tube into a mold, where the powder cools, hardening to the shape of the mold. When the object has solidified, the mold is opened and the ceramic piece is removed.

Extrusion

Extrusion is a continuous process in which ceramic powder is heated in a long barrel. A rotating screw then forces the heated material through an opening of the desired shape. As the continuous form emerges from the die opening, the form cools, solidifies, and is cut to the desired length. Extrusion is used to make products such as ceramic pipe, tiles, and brick.

Densification

The process of densification uses intense heat to condense a ceramic object into a strong, dense product. After being molded, the ceramic object is heated in an electric furnace to temperatures between 1000° and 1700° C (1832° and 3092° F). As the ceramic heats, the powder particles coalesce, much as water droplets join at room temperature. As the ceramic particles merge, the object becomes increasingly dense, shrinking by up to 20 percent of its original size . The goal of this heating process is to maximize the ceramic’s strength by obtaining an internal structure that is compact and extremely dense.

APPLICATIONS

Ceramics are valued for their mechanical properties, including strength, durability, and hardness. Their electrical and magnetic properties make them valuable in electronic applications, where they are used as insulators, semiconductors, conductors, and magnets. Ceramics also have important uses in the aerospace, biomedical, construction, and nuclear industries.

Mechanical Applications

Industrial ceramics are widely used for applications requiring strong, hard, and abrasion-resistant materials. For example, machinists use metal-cutting tools tipped with alumina, as well as tools made from silicon nitrides, to cut, shape, grind, sand, and polish cast iron, nickel-based alloys, and other metals. Silicon nitrides, silicon carbides, and certain types of zirconias are used to make components such as valves and turbocharger rotors for high-temperature diesel and gas-turbine engines. The textile industry uses ceramics for thread guides that can resist the cutting action of fibers traveling through these guides at high speed.

Electrical and Magnetic Applications

Ceramic materials have a wide range of electrical properties. Hence, ceramics are used as insulators (poor conductors of electricity), semiconductors (greater conductivity than insulators but less than good conductors), and conductors (good conductors of electricity).

Ceramics such as aluminum oxide (Al2O3) do not conduct electricity at all and are used to make insulators. Stacks of disks made of this material are used to suspend high-voltage power lines from transmission towers. Similarly, thin plates of aluminum oxide , which remain electrically and chemically stable when exposed to high-frequency currents, are used to hold microchips.

Other ceramics make excellent semiconductors. Small semiconductor chips, often made from barium titanate (BaTiO3) and strontium titanate (SrTiO3), may contain hundreds of thousands of transistors, making possible the miniaturization of electronic devices.

Scientists have discovered a family of copper-oxide-based ceramics that become superconductive at higher temperatures than do metals. Superconductivity refers to the ability of a cooled material to conduct an electric current with no resistance. This phenomenon can occur only at extremely low temperatures, which are difficult to maintain. However, in 1988 researchers discovered a copper oxide ceramic that becomes superconductive at -148° C (-234° F). This temperature is far higher than the temperatures at which metals become superconductors.

Thin insulating films of ceramic material such as barium titanate and strontium titanate are capable of storing large quantities of electricity in extremely small volumes. Devices capable of storing electrical charge are known as capacitors. Engineers form miniature capacitors from ceramics and use them in televisions, stereos, computers, and other electronic products.

Ferrites (ceramics containing iron oxide) are widely used as low-cost magnets in electric motors. These magnets help convert electric energy into mechanical energy. In an electric motor, an electric current is passed through a magnetic field created by a ceramic magnet. As the current passes through the magnetic field, the motor coil turns, creating mechanical energy. Unlike metal magnets, ferrites conduct electric currents at high frequencies (currents that increase and decrease rapidly in voltage). Because ferrites conduct high-frequency currents, they do not lose as much power as metal conductors do. Ferrites are also used in video, radio, and microwave equipment. Manganese zinc ferrites are used in magnetic recording heads, and bits of ferric oxides are the active component in a variety of magnetic recording media, such as recording tape and computer diskettes.

Aerospace

Aerospace engineers use ceramic materials and cermets (durable, highly heat-resistant alloys made by combining powdered metal with an oxide or carbide and then pressing and baking the mixture) to make components for space vehicles. Such components include heat-shield tiles for the space shuttle and nosecones for rocket payloads.

Bioceramics

Certain advanced ceramics are compatible with bone and tissue and are used in the biomedical field to make implants for use within the body. For example, specially prepared, porous alumina will bond with bone and other natural tissue. Medical and dental specialists use this ceramic to make hip joints, dental caps, and dental bridges. Ceramics such as calcium hydroxyl phosphates are compatible with bone and are used to reconstruct fractured or diseased bone.

Nuclear Power

Engineers use uranium ceramic pellets to generate nuclear power. These pellets are produced in fuel fabrication plants from the gas uranium hexafluoride (UF6). The pellets are then packed into hollow tubes called fuel rods and are transported to nuclear power plants.

Building and Construction

Manufacturers use ceramics to make bricks, tiles, piping, and other construction materials. Ceramics for these purposes are made primarily from clay and shale. Household fixtures such as sinks and bathtubs are made from feldspar- and clay-based ceramics.

Coatings

Because ceramic materials are harder and have better corrosion resistance than most metals, manufacturers often coat metal with ceramic enamel. Manufacturers apply ceramic enamel by injecting a compressed gas containing ceramic powder into the flame of a hydrocarbon-oxygen torch burning at about 2500° C (about 4500° F). The semimolten powder particles adhere to the metal, cooling to form a hard enamel. Household appliances, such as refrigerators, stoves, washing machines, and dryers, are often coated with ceramic enamel.

Plastics

Соседние файлы в папке 3