МІНІСТЕРСТВО ОСВІТИ І НАУКИ УКРАЇНИ
Кіровоградський національний
технічний університет
Кафедра іноземних мов
Англійська мова методичні вказівки
до текстів за спеціальністю «Металоріжучі інструменти»
Затверджено
на засіданні кафедри
іноземних мов
Протокол № __ від
Кіровоград
2007
Методичні вказівки до читання текстів англійською мовою за спеціальністю «Металоріжучі інструменти» Укладач: В.О.Гребенюк. – Кіровоград: КНТУ, 2007 – 72с.
Дані методичні вказівки до тексів за спеціальністю «Металоріжучі інструменти» містять навчальні матеріали, призначені для адаптації студентів І та ІІ курсів до спеціальної лексики.
Методичні вказівки розраховані як для аудиторної роботи під керівництвом викладача, так і для самостійної роботи в умовах дистанційного навчання.
Укладач: В.О. Гребенюк, викладач
Рецензент: Т.А. Сотніченко, старший викладач
© / В.О. Гребенюк
© / КНТУ, кафедра іноземних мов, 2007
Unit 1 Cutting Tools
Vocabulary Notes
tool – інструмент
machine tool – інструмент, закріплений на верстаті; верстат
hand tool
mechanical tool
cutting tool
machine tool operation
turning tool – токарний різець
drill – свердло
(milling) cutter – фреза
thread (-cutting) tool – інструмент, що нарізує різьблення
abrasive tool – абразивний інструмент
to treat – обробляти
treatment – обробка
material treatment
tool treatment
hand tool treatment
machine tool treatment
workpiece – виріб, що обробляють; заготівка
workpiece treatment
workpiece size
workpiece strength
to hold, held, held – тримати, закріплювати
to hold a tool
to hold a workpiece
to hold a machine tool
chisel – зубило
chisel size
chisel strength
file – напилок
file length
file strength
saw – пила
saw length
saw application
hammer – молоток
to hold a file and a saw
to hold a chisel and a hammer
to hold a workpiece and a tool
to turn – точити, обточувати
to turn a workpiece
turning – токарна обробка
workpiece turning
turning tool
turning tool treatment
pound – фунт
a few pounds of metal
a few pounds of iron
a few pounds of material
chip – стружка
metal chips
to remove – видаляти, знімати, зрізати
removal – видалення, зняття, зрізання
chip removal – зрізання стружки
to remove chips – chip removal
to remove metal – metal removal
to remove a machine tool – machine tool removal
to revolve (syn. to rotate) – обертати(ся)
to revolve the workpiece
to revolve (rotate) the tool
revolving workpiece
rotating tool
wedge – клин
wedge shape
wedge work
wedge treatment
design – конструкція; конструювати (d. for, to – призначати)
wedge design design for treatment
tool design design for removing chips
machine tool design designed for metal cutting
designed for chip removal
hard – твердий
hard metal
hard chips
hardness – твердість
tool hardness
chisel hardness
wedge hardness
to harden – гартувати
hardened steel
hardened steel wedge
hardened metal
wear – знос
chisel wear
file wear
tool wear
wear resistance – стійкість до зносу, опір зносу
tool wear resistance
file wear resistance
chisel wear resistance
machine tool wear resistance
shank – хвостовик
machine tool shank
shank design
shank wear
cutting edge – ріжуча кромка
tool cutting edge
chisel cutting edge
cutting edge design
penetrate – проникати
penetrate into the material
penetrate into the workpiece
Translate the text.
Cutting Tools
A tool is used by a worker in doing work, in the treatment of the workplace, in reducing this workpiece to the required form by cutting.
There is a difference between hand and mechanical tools. A hand tool is any tool which is held and operated by the hand, such as a chisel, а file, a saw, а hammer etc.
A workman can operate a turning tool by band, even on heavy workpieces. Before all turning was done by hand-operated tools but only a few pounds of metal might be removed in an hour.
With large mechanical tool driven by the power of 40 or 60 horses half a ton of chips may be removed in an hour.
All machine tools are cutting tools. They are that part of the machine which serves for removing material from a revolving workpiece.
The machine tools of the chisel type are tools which operate by cutting, that is they act on the same principle as the knife or chisel. All cutting tools are modifications of the wedge, both in design and operation.
Cutting tools are made of hardened steel or alloy metals or hard alloys, because they must have great hardness and wear resistance. The machine cutting tools consist of a shank for holding the tool in the machine and a cutting edge for removing chips from the work.
Metal-cutting tools are designed for making different parts. While cutting the cutting edges continuously and successively penetrate into the material of the workpiece removing it as a chip.
The number of types of cutting tools used in practice is very large. All the cutting tools depending on the type of the machine on which they are used are divided into turning tools, drills, (milling) cutters, treading tools, abrasive tools.