- •1.1 Functions & Features
- •1.2 System installation
- •1.3.3. Connection
- •1.3.5. Alarm event
- •1.3.7. Remote Pan/Tilt control
- •1.3.8. Remote sensor detection & relay control
- •1.3.9. Remote environment setting
- •1.3.11. Remote emergency recording button
- •1.3.12. Recorded data playback
- •1.3.13 Back-up
- •1.3.14 Popup
- •1.3.15 Exit & minimize the program screen.
- •2.1 Functions & Features
- •2.2 Program installation
- •2.3.3 Real-time live image surveillance.
- •2.3.5 Camera selection
- •2.3.6 Ptz control
- •2.3.7 Search & playback
- •Input this ip address when the user registers the site in rs program setting.
1.3.5. Alarm event
When remote notification is setup in the connected site or DVR, Camera disconnection,
Sensor, Motion Detection are displayed real-time.
1.3.6. Remote file saving button
Remote real-time images can be saved in the client’s PC. The data is saved as
designated in 3.2.4(6). Clicking button starts saving the whole screen, and each
channel shows ‘LIVE+REC’. When saving is finished the message is changed to
‘LIVE’.
1.3.7. Remote Pan/Tilt control
Select the screen to control the pan/tilt and operate the
function with the buttons below.
If the pan/tilt function is operated in the DVR, the remote
control does not work.
1.3.8. Remote sensor detection & relay control
The sensor detection & relay status of the selected site is
displayed in real-time.
The user can operate on/off control remotely.
1.3.9. Remote environment setting
The user can operate remote environment setting by using remote setting button. If the user clicks the remote setting button, the “Environment setup” screen of
the selected DVR will be displayed.
(Please refer to the software manual. If the selected DVR is currently being set,
the remote setting does not work.)
1.3.10. Two-way audio communication
If the user clicks the two-way audio button in the sensor window, audio
communication with the selected DVR user will be available.
1.3.11. Remote emergency recording button
The remote emergency record button in the sensor window operates all channel
recording remotely in an emergency. The data is recorded in the currently
displayed DVR.
1.3.12. Recorded data playback
Click the search tap to enter the recorded data playback screen. To return to
the real- time surveillance (live) screen, click any other tap among the three taps
except the search tap.
1.3.12.1 Remote search
Click the selected date, hour & minute after the recorded time is displayed.
Then, click the playback button to search the recorded data.
1.3.12.2 Search Saving
To search saved images by clicking recording
button or by channel search, click route
specifying button to specify route on the
saving search screen. Then choose Directory of
the saved files with clicking route search button on
the folder search screen..
Folder name shows Date and time. With choosing the path, files under the folder are
shown. Click ‘enter’ after choosing the desired file to return to the search screen.
1.3.12.3 Channel Connection
The user can monitor the current screen by channel, search other sites or different
time while searching the whole screen. Please refer the 1.3.4.8
1.3.12.4 Saving Search Screen
There are two ways to save current search screen ; Saving by Channel with clicking
the right button of the mouse and emergency recording button. ‘Playback + REC’ is
displayed on the channel images recorded on the upper right.
1.3.12.5 Browse saved image panorama
To see the panorama images, click the right button of the mouse and choose
‘panorama starting’. To stop this, choose ‘stop panorama’ from the right button of the
mouse.