- •Introduction
- •Table of Contents
- •1. Main Data and Outputs
- •1.1 Maximum continuous output
- •1.2 Reference conditions
- •1.3 Operation in inclined position
- •1.4 Dimensions and weights
- •2. Operating ranges
- •2.1 Engine operating range
- •2.2 Loading capacity
- •2.3 Low air temperature
- •2.4 Operation at low load and idling
- •3. Technical Data
- •3.1 Wärtsilä 4L20
- •3.2 Wärtsilä 6L20
- •3.3 Wärtsilä 8L20
- •3.4 Wärtsilä 9L20
- •4. Description of the Engine
- •4.1 Definitions
- •4.2 Main components and systems
- •4.3 Cross sections of the engine
- •4.4 Overhaul intervals and expected lifetimes
- •5. Piping Design, Treatment and Installation
- •5.1 Pipe dimensions
- •5.2 Trace heating
- •5.3 Operating and design pressure
- •5.4 Pipe class
- •5.5 Insulation
- •5.6 Local gauges
- •5.7 Cleaning procedures
- •5.8 Flexible pipe connections
- •5.9 Clamping of pipes
- •6. Fuel Oil System
- •6.1 Acceptable fuel characteristics
- •6.2 Internal fuel oil system
- •6.3 External fuel oil system
- •7. Lubricating Oil System
- •7.1 Lubricating oil requirements
- •7.2 Internal lubricating oil system
- •7.3 External lubricating oil system
- •7.4 Crankcase ventilation system
- •7.5 Flushing instructions
- •8. Compressed Air System
- •8.1 Internal compressed air system
- •8.2 External compressed air system
- •9. Cooling Water System
- •9.1 Water quality
- •9.2 Internal cooling water system
- •9.3 External cooling water system
- •10. Combustion Air System
- •10.1 Engine room ventilation
- •10.2 Combustion air system design
- •11. Exhaust Gas System
- •11.1 Internal exhaust gas system
- •11.2 Exhaust gas outlet
- •11.3 External exhaust gas system
- •12. Turbocharger Cleaning
- •12.1 Turbine cleaning system
- •12.2 Compressor cleaning system
- •13. Exhaust Emissions
- •13.1 Diesel engine exhaust components
- •13.2 Marine exhaust emissions legislation
- •13.3 Methods to reduce exhaust emissions
- •14. Automation System
- •14.1 UNIC C1
- •14.2 UNIC C2
- •14.3 Functions
- •14.4 Alarm and monitoring signals
- •14.5 Electrical consumers
- •15. Foundation
- •15.1 Steel structure design
- •15.2 Mounting of main engines
- •15.3 Mounting of generating sets
- •15.4 Flexible pipe connections
- •16. Vibration and Noise
- •16.1 External forces and couples
- •16.2 Mass moments of inertia
- •16.3 Structure borne noise
- •16.4 Air borne noise
- •17. Power Transmission
- •17.1 Flexible coupling
- •17.2 Clutch
- •17.3 Shaft locking device
- •17.4 Power-take-off from the free end
- •17.5 Input data for torsional vibration calculations
- •17.6 Turning gear
- •18. Engine Room Layout
- •18.1 Crankshaft distances
- •18.2 Space requirements for maintenance
- •18.3 Transportation and storage of spare parts and tools
- •18.4 Required deck area for service work
- •19. Transport Dimensions and Weights
- •19.1 Lifting of engines
- •19.2 Engine components
- •20. Product Guide Attachments
- •21. ANNEX
- •21.1 Unit conversion tables
- •21.2 Collection of drawing symbols used in drawings
WÄRTSILÄ 20 PRODUCT GUIDE
Product Guide
Introduction
Introduction
This Product Guide provides data and system proposals for the early design phase of marine engine installations. For contracted projects specific instructions for planning the installation are always delivered. Any data and information herein is subject to revision without notice. This 3/2009 issue replaces all previous issues of the Wärtsilä 20 Project Guides.
Issue |
Published |
Updates |
3/2009 |
19.11.2009 |
Chapters Technical Data and Lubricating Oil System updated |
2/2009 |
02.09.2009 |
Chapter Exhaust Emissions updated, service spaces updated, structure borne noise |
|
|
added and other minor updates |
1/2009 |
31.01.2009 |
Chapter Operating Ranges updated and other minor updates |
5/2008 |
26.11.2008 |
Dimensional drawings added, Compact Silencer System added, PTO arrangement up- |
|
|
dated, priming pump capacity increased |
4/2008 |
29.08.2008 |
Chapter compressed air system updated, technical data added for IMO Tier 2 engines |
|
|
and other minor updates. |
Wärtsilä, Ship Power Technology
Vaasa, November 2009
THIS PUBLICATION IS DESIGNED TO PROVIDE AS ACCURATE AND AUTHORITATIVE INFORMATION REGARDING THE SUBJECTS COVERED AS WAS AVAILABLE AT THE TIME OF WRITING. HOWEVER, THE PUBLICATION DEALS WITH COMPLICATED TECHNICAL MATTERS AND THE DESIGN OF THE SUBJECT AND PRODUCTS IS SUBJECT TO REGULAR IMPROVEMENTS, MODIFICATIONS AND CHANGES. CONSEQUENTLY, THE PUBLISHER AND COPYRIGHT OWNER OF THIS PUBLICATION CANNOT TAKE ANY RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR OMISSIONS IN THIS PUBLICATION OR FOR DISCREPANCIES ARISING FROM THE FEATURES OF ANY ACTUAL ITEM IN THE RESPECTIVE PRODUCT BEING DIFFERENT FROM THOSE SHOWN IN THIS PUBLICATION. THE PUBLISHER AND COPYRIGHT OWNER SHALL NOT BE LIABLE UNDER ANY CIRCUMSTANCES, FOR ANY CONSEQUENTIAL, SPECIAL, CONTINGENT, OR INCIDENTAL DAMAGES OR INJURY, FINANCIAL OR OTHERWISE, SUFFERED BY ANY PART ARISING OUT OF, CONNECTED WITH, OR RESULTING FROM THE USE OF THIS PUBLICATION OR THE INFORMATION CONTAINED THEREIN.
COPYRIGHT © 2009 BY WÄRTSILÄ FINLAND OY
ALL RIGHTS RESERVED. NO PART OF THIS PUBLICATION MAY BE REPRODUCED OR COPIED IN ANY FORM OR BY ANY MEANS, WITHOUT PRIOR WRITTEN PERMISSION OF THE COPYRIGHT OWNER.
Product Guide Wärtsilä 20 - 3/2009 |
iii |
Product Guide
Table of Contents
Table of Contents
1. |
Main Data and Outputs ............................................................................................................................. |
1 |
|
|
1.1 |
Maximum continuous output ............................................................................................................ |
1 |
|
1.2 |
Reference conditions ........................................................................................................................ |
2 |
|
1.3 |
Operation in inclined position ........................................................................................................... |
2 |
|
1.4 |
Dimensions and weights .................................................................................................................. |
3 |
2. |
Operating ranges ...................................................................................................................................... |
5 |
|
|
2.1 |
Engine operating range .................................................................................................................... |
5 |
|
2.2 |
Loading capacity .............................................................................................................................. |
6 |
|
2.3 |
Low air temperature ........................................................................................................................ |
8 |
|
2.4 |
Operation at low load and idling ....................................................................................................... |
9 |
3. |
Technical Data ........................................................................................................................................... |
10 |
|
|
3.1 |
Wärtsilä 4L20 ................................................................................................................................... |
10 |
|
3.2 |
Wärtsilä 6L20 ................................................................................................................................... |
12 |
|
3.3 |
Wärtsilä 8L20 ................................................................................................................................... |
14 |
|
3.4 |
Wärtsilä 9L20 ................................................................................................................................... |
16 |
4. |
Description of the Engine ......................................................................................................................... |
18 |
|
|
4.1 |
Definitions ......................................................................................................................................... |
18 |
|
4.2 |
Main components and systems ........................................................................................................ |
18 |
|
4.3 |
Cross sections of the engine ............................................................................................................ |
21 |
|
4.4 |
Overhaul intervals and expected lifetimes ........................................................................................ |
22 |
5. |
Piping Design, Treatment and Installation .............................................................................................. |
23 |
|
|
5.1 |
Pipe dimensions ............................................................................................................................... |
23 |
|
5.2 |
Trace heating .................................................................................................................................... |
24 |
|
5.3 |
Operating and design pressure ........................................................................................................ |
24 |
|
5.4 |
Pipe class ......................................................................................................................................... |
25 |
|
5.5 |
Insulation .......................................................................................................................................... |
25 |
|
5.6 |
Local gauges .................................................................................................................................... |
25 |
|
5.7 |
Cleaning procedures ........................................................................................................................ |
25 |
|
5.8 |
Flexible pipe connections ................................................................................................................. |
26 |
|
5.9 |
Clamping of pipes ............................................................................................................................. |
27 |
6. |
Fuel Oil System ......................................................................................................................................... |
29 |
|
|
6.1 |
Acceptable fuel characteristics ......................................................................................................... |
29 |
|
6.2 |
Internal fuel oil system ..................................................................................................................... |
34 |
|
6.3 |
External fuel oil system .................................................................................................................... |
36 |
7. |
Lubricating Oil System ............................................................................................................................. |
51 |
|
|
7.1 |
Lubricating oil requirements ............................................................................................................. |
51 |
|
7.2 |
Internal lubricating oil system ........................................................................................................... |
52 |
|
7.3 |
External lubricating oil system .......................................................................................................... |
54 |
|
7.4 |
Crankcase ventilation system ........................................................................................................... |
59 |
|
7.5 |
Flushing instructions ........................................................................................................................ |
60 |
8. |
Compressed Air System ........................................................................................................................... |
61 |
|
|
8.1 |
Internal compressed air system ....................................................................................................... |
61 |
|
8.2 |
External compressed air system ...................................................................................................... |
62 |
9. |
Cooling Water System .............................................................................................................................. |
65 |
|
|
9.1 |
Water quality ................................................................................................................................... |
65 |
|
9.2 |
Internal cooling water system ........................................................................................................... |
66 |
|
9.3 |
External cooling water system .......................................................................................................... |
69 |
10. |
Combustion Air System ........................................................................................................................... |
80 |
|
|
10.1 |
Engine room ventilation .................................................................................................................... |
80 |
iv |
|
|
Product Guide Wärtsilä 20 - 3/2009 |
|
|
|
Product Guide |
|
|
|
Table of Contents |
|
10.2 |
Combustion air system design ......................................................................................................... |
81 |
11. |
Exhaust Gas System ................................................................................................................................. |
84 |
|
|
11.1 |
Internal exhaust gas system ............................................................................................................. |
84 |
|
11.2 |
Exhaust gas outlet ............................................................................................................................ |
85 |
|
11.3 |
External exhaust gas system ........................................................................................................... |
86 |
12. |
Turbocharger Cleaning ............................................................................................................................. |
91 |
|
|
12.1 |
Turbine cleaning system ................................................................................................................... |
91 |
|
12.2 |
Compressor cleaning system ........................................................................................................... |
91 |
13. |
Exhaust Emissions ................................................................................................................................... |
92 |
|
|
13.1 |
Diesel engine exhaust components ................................................................................................. |
92 |
|
13.2 |
Marine exhaust emissions legislation ............................................................................................... |
93 |
|
13.3 |
Methods to reduce exhaust emissions ............................................................................................. |
95 |
14. |
Automation System .................................................................................................................................. |
98 |
|
|
14.1 |
UNIC C1 .......................................................................................................................................... |
98 |
|
14.2 |
UNIC C2 ........................................................................................................................................... |
104 |
|
14.3 |
Functions .......................................................................................................................................... |
109 |
|
14.4 |
Alarm and monitoring signals ........................................................................................................... |
110 |
|
14.5 |
Electrical consumers ........................................................................................................................ |
111 |
15. |
Foundation ................................................................................................................................................. |
113 |
|
|
15.1 |
Steel structure design ...................................................................................................................... |
113 |
|
15.2 |
Mounting of main engines ................................................................................................................ |
113 |
|
15.3 |
Mounting of generating sets ............................................................................................................. |
117 |
|
15.4 |
Flexible pipe connections ................................................................................................................. |
119 |
16. |
Vibration and Noise .................................................................................................................................. |
120 |
|
|
16.1 |
External forces and couples ............................................................................................................. |
120 |
|
16.2 |
Mass moments of inertia .................................................................................................................. |
121 |
|
16.3 |
Structure borne noise ....................................................................................................................... |
122 |
|
16.4 |
Air borne noise ................................................................................................................................. |
123 |
17. |
Power Transmission ................................................................................................................................. |
124 |
|
|
17.1 |
Flexible coupling ............................................................................................................................... |
124 |
|
17.2 |
Clutch ............................................................................................................................................... |
125 |
|
17.3 |
Shaft locking device .......................................................................................................................... |
125 |
|
17.4 |
Power-take-off from the free end ...................................................................................................... |
126 |
|
17.5 |
Input data for torsional vibration calculations ................................................................................... |
127 |
|
17.6 |
Turning gear ..................................................................................................................................... |
128 |
18. |
Engine Room Layout ................................................................................................................................ |
129 |
|
|
18.1 |
Crankshaft distances ........................................................................................................................ |
129 |
|
18.2 |
Space requirements for maintenance .............................................................................................. |
130 |
|
18.3 |
Transportation and storage of spare parts and tools ........................................................................ |
130 |
|
18.4 |
Required deck area for service work ................................................................................................ |
130 |
19. |
Transport Dimensions and Weights ........................................................................................................ |
134 |
|
|
19.1 |
Lifting of engines .............................................................................................................................. |
134 |
|
19.2 |
Engine components .......................................................................................................................... |
135 |
20. |
Product Guide Attachments ..................................................................................................................... |
137 |
|
21. |
ANNEX ........................................................................................................................................................ |
138 |
|
|
21.1 |
Unit conversion tables ...................................................................................................................... |
138 |
|
21.2 |
Collection of drawing symbols used in drawings .............................................................................. |
139 |
Product Guide Wärtsilä 20 - 3/2009 |
v |
Product Guide
This page intentionally left blank
vi |
Product Guide Wärtsilä 20 - 3/2009 |