- •Contents
- •1.1 Introduction
- •1.2 Selection of dental materials
- •1.3 Evaluation of materials
- •2.1 Introduction
- •2.2 Mechanical properties
- •2.3 Rheological properties
- •2.4 Thermal properties
- •2.5 Adhesion
- •2.6 Miscellaneous physical properties
- •2.7 Chemical properties
- •2.8 Biological properties
- •2.9 Suggested further reading
- •3.1 Introduction
- •3.2 Requirements of dental cast materials
- •3.3 Composition
- •3.4 Manipulation and setting characteristics
- •3.5 Properties of the set material
- •3.6 Applications
- •3.7 Advantages and disadvantages
- •3.8 Suggested further reading
- •4.1 Introduction
- •4.2 Requirements of wax-pattern materials
- •4.3 Composition of waxes
- •4.4 Properties of dental waxes
- •4.5 Applications
- •4.6 Suggested further reading
- •5.1 Introduction
- •5.2 Requirements of investments for alloy casting procedures
- •5.3 Available materials
- •5.4 Properties of investment materials
- •5.5 Applications
- •5.6 Suggested further reading
- •6.1 Introduction
- •6.2 Structure and properties of metals
- •6.3 Structure and properties of alloys
- •6.4 Cooling curves
- •6.5 Phase diagrams
- •6.6 Suggested further reading
- •7.1 Introduction
- •7.2 Pure gold fillings (cohesive gold)
- •7.3 Traditional casting gold alloys
- •7.4 Hardening heat treatments (theoretical considerations)
- •7.5 Heat treatments (practical considerations)
- •7.6 Alloys with noble metal content of at least 25% but less than 75%
- •7.7 Soldering and brazing materials for noble metals
- •7.8 Noble alloys for metal-bonded ceramic restorations
- •7.9 Biocompatibility
- •7.10 Suggested further reading
- •8.1 Introduction
- •8.2 Composition
- •8.3 Manipulation of base metal casting alloys
- •8.4 Properties
- •8.5 Comparison with casting gold alloys
- •8.6 Biocompatibility
- •8.7 Metals and alloys for implants
- •8.8 Suggested further reading
- •9.1 Introduction
- •9.2 Investment mould
- •9.3 Casting machines
- •9.4 Faults in castings
- •9.5 Suggested further reading
- •10.1 Introduction
- •10.2 Steel
- •10.3 Stainless steel
- •10.4 Stainless steel denture bases
- •10.5 Wires
- •10.6 Suggested further reading
- •11.1 Introduction
- •11.2 Composition of traditional dental porcelain
- •11.3 Compaction and firing
- •11.4 Properties of porcelain
- •11.5 Alumina inserts and aluminous porcelain
- •11.6 Sintered alumina core ceramics
- •11.7 Injection moulded and pressed ceramics
- •11.8 Cast glass and polycrystalline ceramics
- •11.9 CAD–CAM restorations
- •11.10 Porcelain veneers
- •11.11 Porcelain fused to metal (PFM)
- •11.12 Capillary technology
- •11.13 Bonded platinum foil
- •11.14 Suggested further reading
- •12.1 Introduction
- •12.2 Polymerisation
- •12.3 Physical changes occurring during polymerisation
- •12.4 Structure and properties
- •12.5 Methods of fabricating polymers
- •12.6 Suggested further reading
- •13.1 Introduction
- •13.2 Requirements of denture base polymers
- •13.3 Acrylic denture base materials
- •13.4 Modified acrylic materials
- •13.5 Alternative polymers
- •13.6 Suggested further reading
- •14.1 Introduction
- •14.2 Hard reline materials
- •14.3 Tissue conditioners
- •14.4 Temporary soft lining materials
- •14.5 Permanent soft lining materials
- •14.6 Self-administered relining materials
- •14.7 Suggested further reading
- •15.1 Introduction
- •15.2 Requirements
- •15.3 Available materials
- •15.4 Properties
- •15.5 Suggested further reading
- •16.1 Introduction
- •16.2 Classification of impression materials
- •16.3 Requirements
- •16.4 Clinical considerations
- •16.5 Suggested further reading
- •17.1 Introduction
- •17.2 Impression plaster
- •17.3 Impression compound
- •17.4 Impression waxes
- •18.1 Introduction
- •18.2 Reversible hydrocolloids (agar)
- •18.3 Irreversible hydrocolloids (alginates)
- •18.5 Modified alginates
- •18.6 Suggested further reading
- •19.1 Introduction
- •19.2 Polysulphides
- •19.3 Silicone rubbers (condensation curing)
- •19.4 Silicone rubbers (addition curing)
- •19.5 Polyethers
- •19.6 Comparison of the properties of elastomers
- •19.7 Suggested further reading
- •20.1 Introduction
- •20.2 Appearance
- •20.3 Rheological properties and setting characteristics
- •20.4 Chemical properties
- •20.5 Thermal properties
- •20.6 Mechanical properties
- •20.7 Adhesion
- •20.8 Biological properties
- •20.9 Historical
- •21.1 Introduction
- •21.2 Composition
- •21.3 Setting reactions
- •21.4 Properties
- •21.6 Manipulative variables
- •21.7 Suggested further reading
- •22.1 Introduction
- •22.2 Acrylic resins
- •22.3 Composite materials – introduction
- •22.4 Classification and composition of composites
- •22.5 Properties of composites
- •22.6 Fibre reinforcement of composite structures
- •22.7 Clinical handling notes for composites
- •22.8 Applications of composites
- •22.9 Suggested further reading
- •23.1 Introduction
- •23.2 Acid-etch systems for bonding to enamel
- •23.3 Applications of the acid-etch technique
- •23.4 Bonding to dentine – background
- •23.5 Dentine conditioning – the smear layer
- •23.6 Priming and bonding
- •23.7 Current concepts in dentine bonding – the hybrid layer
- •23.8 Classification of dentine bonding systems
- •23.9 Bonding to alloys, amalgam and ceramics
- •23.10 Bond strength and leakage measurements
- •23.11 Polymerizable luting agents
- •23.12 Suggested further reading
- •24.1 Introduction
- •24.2 Composition
- •24.3 Setting reaction
- •24.4 Properties
- •24.5 Cermets
- •24.6 Applications and clinical handling notes
- •24.7 Suggested further reading
- •25.1 Introduction
- •25.2 Composition and classification
- •25.3 Setting characteristics
- •25.4 Dimensional change and dimensional stability
- •25.5 Mechanical properties
- •25.6 Adhesive characteristics
- •25.7 Fluoride release
- •25.8 Clinical handling notes
- •25.9 Suggested further reading
- •26.1 Introduction
- •26.2 Requirements
- •26.3 Available materials
- •26.4 Properties
- •27.1 Introduction
- •27.2 Requirements of cavity lining materials
- •27.3 Requirements of Iuting materials
- •27.4 Requirements of endodontic cements
- •27.5 Requirements of orthodontic cements
- •27.6 Suggested further reading
- •28.1 Introduction
- •28.2 Zinc phosphate cements
- •28.3 Silicophosphate cements
- •28.4 Copper cements
- •28.5 Suggested further reading
- •29.1 Introduction
- •29.2 Zinc oxide/eugenol cements
- •29.3 Ortho-ethoxybenzoic acid (EBA) cements
- •29.4 Calcium hydroxide cements
- •29.5 Suggested further reading
- •30.1 Introduction
- •30.2 Polycarboxylate cements
- •30.3 Glass ionomer cements
- •30.4 Resin-modified glass ionomers and compomers
- •30.5 Suggested further reading
- •31.1 Introduction
- •31.2 Irrigants and lubricants
- •31.3 Intra-canal medicaments
- •31.4 Endodontic obturation materials
- •31.5 Historical materials
- •31.6 Contemporary materials
- •31.7 Clinical handling
- •31.8 Suggested further reading
- •Appendix 1
- •Index
Applied Dental Materials
Applied Dental Materials
Ninth Edition
John F. McCabe
BSc, PhD, DSc
Professor of Dental Materials Science
Newcastle University
Angus W.G. Walls
BDS, PhD, FDSRCS
Professor of Restorative Dentistry
Newcastle University
© 2008 by Blackwell Publishing Ltd
Blackwell Publishing editorial offices:
Blackwell Publishing Ltd, 9600 Garsington Road, Oxford OX4 2DQ, UK
Tel: +44 (0)1865 776868
Blackwell Publishing Professional, 2121 State Avenue, Ames, Iowa 50014-8300, USA
Tel: +1 515 292 0140
Blackwell Publishing Asia Pty Ltd, 550 Swanston Street, Carlton, Victoria 3053, Australia
Tel: +61 (0)3 8359 1011
The right of the Author to be identified as the Author of this Work has been asserted in accordance with the Copyright, Designs and Patents Act 1988.
All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording or otherwise, except as permitted by the UK Copyright, Designs and Patents Act 1988, without the prior permission of the publisher.
Designations used by companies to distinguish their products are often claimed as trademarks. All brand names and product names used in this book are trade names, service marks, trademarks or registered trademarks of their respective owners. The Publisher is not associated with any product or vendor mentioned in this book.
This publication is designed to provide accurate and authoritative information in regard to the subject matter covered. It is sold on the understanding that the Publisher is not engaged in rendering professional services. If professional advice or other expert assistance is required, the services of a competent professional should be sought.
First published 1956. Second edition 1961. Third edition 1967. Fourth edition 1972. Fifth edition 1976. Sixth edition 1985. Seventh edition 1990. Eighth edition 1998.
Ninth edition published 2008 by Blackwell Publishing Ltd
ISBN-13: 978-1-4051-3961-8
Library of Congress Cataloging-in-Publication Data
McCabe, J.F. (John F.)
Applied dental materials. – 9th ed. / J.F. McCabe, A.W.G. Walls. p. ; cm.
Includes bibliographical references and index. ISBN: 978-1-4051-3961-8 (pbk. : alk. paper)
1. Dental materials. I. Walls, Angus. II. Title. [DNLM: 1. Dental Materials. WU 190 M477a 2008]
RK652.5.A55 2008 617.6′95–dc22
2007044377
A catalogue record for this title is available from the British Library
Set in 9.5/11.5 pt Sabon
by SNP Best-set Typesetter Ltd., Hong Kong Printed and bound in Singapore
by Fabulous Printers Pte Ltd
The publisher’s policy is to use permanent paper from mills that operate a sustainable forestry policy, and which has been manufactured from pulp processed using acid-free and elementary chlorine-free practices.
Furthermore, the publisher ensures that the text paper and cover board used have met acceptable environmental accreditation standards.
For further information on Blackwell Publishing, visit our website:
www.blackwellpublishing.com
Contents
Preface, viii
1Science of Dental Materials, 1
1.1 Introduction, 1; 1.2 Selection of dental materials, 1; 1.3 Evaluation of dental materials, 3
2Properties used to Characterise
Materials, 4
2.1 Introduction, 4; 2.2 Mechanical properties, 6; 2.3 Rheological properties, 18; 2.4 Thermal properties, 21; 2.5 Adhesion, 23;
2.6Miscellaneous physical properties, 26;
2.7Chemical properties, 27; 2.8 Biological properties, 30; 2.9 Suggested further reading, 31
3Gypsum Products for Dental Casts, 32
3.1 Introduction, 32; 3.2 Requirements of dental cast materials, 32; 3.3 Composition,
33; 3.4 Manipulation and setting characteristics, 33 3.5 Properties of the set material,
37; 3.6 Applications, 38; 3.7 Advantages and disadvantages, 38; 3.8 Suggested further reading, 39
7Gold and Alloys of Noble Metals, 62
7.1 Introduction, 62; 7.2 Pure gold fillings (cohesive gold), 62; 7.3 Traditional casting gold alloys, 63; 7.4 Hardening heat treatments
(theoretical considerations), 65; 7.5 Heat treatments (practical considerations),
67; 7.6 Alloys with noble metal content of at least 25% but less than 75%, 68; 7.7 Soldering and brazing materials for noble metals,
69; 7.8 Noble alloys for metal-bonded ceramic restorations, 70; 7.9 Biocompatibility,
70; 7.10 Suggested further reading, 70
8Base Metal Casting Alloys, 71
8.1 Introduction, 71; 8.2 Composition,
71; 8.3 Manipulation of base metal casting alloys, 72; 8.4 Properties, 73; 8.5 Comparison with casting gold alloys, 74; 8.6 Biocompatibility,
76; 8.7 Metals and alloys for implants, 77; 8.8 Suggested further reading, 79
9Casting, 80
9.1 Introduction, 80; 9.2 Investment mould, 80; 9.3 Casting machines, 81; 9.4 Faults in castings, 81; 9.5 Suggested further reading, 83
4Waxes, 40
4.1 Introduction, 40; 4.2 Requirements of waxpattern materials, 40; 4.3 Composition of waxes, 40; 4.4 Properties of dental waxes,
41; 4.5 Applications, 42; 4.6 Suggested further reading, 45
5Investments and Refractory Dies, 46
5.1 Introduction, 46; 5.2 Requirements of investments for alloy casting procedures,
46; |
5.3 |
Available materials, 47; |
5.4 Properties |
of investment materials, 49; 5.5 |
Applications, |
||
51; |
5.6 |
Suggested further reading, 52 |
6Metals and Alloys, 53
6.1 Introduction, 53; 6.2 Structure and properties of metals, 53; 6.3 Structure and properties of alloys, 56; 6.4 Cooling curves, 57; 6.5 Phase diagrams, 57; 6.6 Suggested further reading, 61
10 Steel and Wrought Alloys, 84
10.1 Introduction, 84; 10.2 Steel,
84; 10.3 Stainless steel, 85; 10.4 Stainless steel denture bases, 86; 10.5 Wires,
86; 10.6 Suggested further reading, 88
11Ceramics and Porcelain Fused to Metal (PFM), 89
11.1 Introduction, 89; 11.2 Composition of
traditional dental porcelain, 89; |
11.3 Compaction |
|||
and firing, 90; |
11.4 |
Properties of porcelain, |
||
91; |
11.5 Alumina inserts and aluminous |
|||
porcelain, 92; |
11.6 Sintered alumina core |
|||
ceramics, 93; |
11.7 |
Injection moulded and pressed |
||
ceramics, 94; |
11.8 |
Cast glass and polycrystalline |
||
ceramics, 94; |
11.9 |
CAD-CAM restorations, |
||
95; |
11.10 Porcelain veneers, 97; |
11.11 Porcelain |
||
fused to metal (PFM), 97; 11.12 Capillary |
||||
technology, 100; 11.13 Bonded platinum foil, |
||||
100; |
11.14 Suggested further reading, 100 |
v
vi Contents
12Synthetic Polymers, 101
12.1Introduction, 101; 12.2 Polymerisation, 101; 12.3 Physical changes occurring during polymerisation, 105; 12.4 Structure and properties, 107; 12.5 Methods of fabricating polymers, 109; 12.6 Suggested further reading, 109
13Denture Base Polymers, 110
13.1Introduction, 110; 13.2 Requirements of
denture base polymers, 110; 13.3 Acrylic denture
base materials, 112; |
13.4 Modified acrylic |
materials, 121; 13.5 |
Alternative polymers, |
123; 13.6 Suggested further reading, 123
14Denture Lining Materials, 124
14.1Introduction, 124; 14.2 Hard reline materials, 124; 14.3 Tissue conditioners, 126; 14.4 Temporary soft lining materials, 128; 14.5 Permanent soft lining materials, 128; 14.6 Self-administered relining materials, 132; 14.7 Suggested further reading, 132
15Artificial Teeth, 133
15.1Introduction, 133; 15.2 Requirements, 133; 15.3 Available materials,
133; 15.4 Properties, 133; 15.5 Suggested further reading, 135
16Impression Materials: Classification and Requirements, 136
16.1Introduction, 136; 16.2 Classification of impression materials, 136; 16.3 Requirements, 137; 16.4 Clinical considerations,
142; 16.5 Suggested further reading, 146
17Non-elastic Impression Materials, 147
17.1Introduction, 147; 17.2. Impression plaster, 147; 17.3 Impression compound,
148; 17.4 Impression waxes, 151; 17.5 Zinc oxide/eugenol impression pastes, 151
18Elastic Impression Materials: Hydrocolloids, 154
18.1Introduction, 154; 18.2 Reversible hydrocolloids (agar), 154; 18.3 Irreversible hydrocolloids (alginates), 158; 18.4 Combined reversible/irreversible techniques,
161; 18.5 Modified alginates,
161; 18.6 Suggested further reading, 162
19Elastic Impression Materials: Synthetic Elastomers, 163
19.1Introduction, 163; 19.2 Polysulphides,
163; |
19.3 |
Silicone rubbers (condensation curing), |
167; |
19.4 |
Silicone rubbers (addition curing), |
168; |
19.5 |
Polyethers, 172; 19.6 Comparison of |
the properties of elastomers, 175; 19.7 Suggested further reading, 177
20 Requirements of Direct Filling Materials and Historical Perspectives, 178
20.1 Introduction, 178; 20.2 Appearance, 178; 20.3 Rheological properties and setting characteristics, 178; 20.4 Chemical properties, 179; 20.5 Thermal properties,
179; 20.6 Mechanical properties,
179; 20.7 Adhesion, 179; 20.8 Biological properties, 179; 20.9 Historical, 180
21Dental Amalgam, 181
21.1Introduction, 181; 21.2 Composition, 181; 21.3 Setting reactions,
183; 21.4 Properties, 184; 21.5 Clinical handling notes for dental amalgam,
189; 21.6 Manipulative variables,
191; 21.7 Suggested further reading, 194
22Resin-based Filling Materials, 195
22.1Introduction, 195; 22.2 Acrylic resins, 195; 22.3 Composite materials – introduction, 196; 22.4 Classification and composition of composites, 197; 22.5 Properties of composites, 202; 22.6 Fibre reinforcement of composite structures, 213; 22.7 Clinical handling notes for
composites, 216; 22.8 Applications of composites 223; 22.9 Suggested further reading, 224
23Adhesive Restorative Materials: Bonding of Resin-based Materials, 225
23.1Introduction, 225; 23.2 Acid-etch systems
for bonding to enamel, 225; |
23.3 Applications of |
the acid-etch technique, 227; |
23.4 Bonding to |
dentine – background, 229; |
23.5 Dentine |
conditioning – the smear layer, 233; 23.6 Priming and bonding, 234; 23.7 Current concepts in dentine bonding – the hybrid layer,
236; 23.8 Classification of dentine bonding systems, 237; 23.9 Bonding to alloys, amalgam and ceramics, 238; 23.10 Bond strength and leakage measurements, 240; 23.11 Polymerizable luting agents, 242; 23.12 Suggested further reading, 244
24 Glass Ionomer Restorative Materials
(Polyalkenoates), 245
24.1 |
Introduction, 245; 24.2 Composition, |
|||
245; |
24.3 |
Setting reaction, 247; |
24.4 Properties, |
|
248; |
24.5 |
Cermets, 252; |
24.6 Applications and |
|
clinical handling notes, 252; |
24.7 |
Suggested |
||
further reading, 256 |
|
|
25Resin-modified Glass Ionomers and Related Materials, 257
25.1 Introduction, 257; 25.2 Composition and classification, 257; 25.3 Setting characteristics, 260; 25.4 Dimensional change and dimensional stability, 261; 25.5 Mechanical properties, 262; 25.6 Adhesive characteristics,
262; 25.7 Fluoride release, 263; 25.8 Clinical handling notes, 264; 25.9 Suggested further reading, 264
Contents vii
26Temporary Crown and Bridge Resins, 265
26.1Introduction, 265; 26.2 Requirements, 265; 26.3 Available materials,
265; 26.4 Properties, 266
27Requirements of Dental Cements for Lining, Base and Luting Applications, 267
27.1Introduction, 267; 27.2 Requirements of
cavity lining materials, 267; |
27.3 Requirements of |
luting materials, 270; 27.4 Requirements of |
|
endodontic cements, 271; |
27.5 Requirements of |
orthodontic cements, 272; |
27.6 Suggested further |
reading, 272 |
|
28Cements Based on Phosphoric Acid, 273
28.1Introduction, 273; 28.2 Zinc phosphate cements, 273; 28.3 Silicophosphate cements, 277; 28.4 Copper cements, 277; 28.5 Suggested further reading, 277
29Cements Based on Organometallic Chelate Compounds, 278
29.1Introduction, 278; 29.2 Zinc oxide/eugenol cements, 278; 29.3 Ortho-ethoxybenzoic acid (EBA) cements, 280; 29.4 Calcium hydroxide cements, 280; 29.5 Suggested further reading, 283
30Polycarboxylates, Glass Ionomers and Resin-modified Glass Ionomers for Luting and Lining, 284
30.1Introduction, 284; 30.2 Polycarboxylate cements, 284; 30.3 Glass ionomer cements, 285; 30.4 Resin-modified glass ionomers and
compomers, 286; 30.5 Suggested further reading, 288
31Endodontic Materials, 289
31.1Introduction, 289; 31.2 Irrigants and lubricants, 289; 31.3 Intra-canal medicaments, 290; 31.4 Endodontic obturation materials, 291; 31.5 Historical materials,
291; 31.6 Contemporary materials, 292; 31.7 Clinical handling, 294;
31.8Suggested further reading, 296
Appendix 1, 297
Index, 299
Preface
In producing this ninth edition of Applied Dental Materials we have updated the text in both content and appearance. We hope that the book will remain helpful to students and teachers of the science of dental materials alike by remaining true to the core principles and developing them into a more comprehensive text which covers a wide spectrum of materials falling within the scope of ‘dental materials’. Hence, there are more references to practical issues like handling and clinical performance of materials, whilst maintaining a strong link to quality issues encompassed within
newly developed ISO standards. Some areas, such as adhesion, ceramics, light activation technology, CAD-CAM have been developed and expanded significantly from the eighth edition, reflecting significant changes or developments in these areas. There is a new chapter on endodontic materials. All areas have benefited from a fresh approach to the use of drawings and photographs including the use of colour for the first time.
John McCabe
Angus Walls
viii