23. OUTPUTTING JOB DATA
It is possible to output data within a JOB to a host computer or printer.
Communication cables: “27.2 Optional Accessories”
Output format and command operations: “Interfacing with the SOKKIA SDR Electronic Field Book” and “Command Explanations” manuals.
•Measurement results, instrument station data, known point data, notes, and coordinate data in the JOB is output.
•Known point data entered from an external instrument is not output.
•Communication setup can be performed in the JOB menu as well. Select “Comms Setup” in <JOB>.
• When “inch” is selected as the distance unit, data is output in “feet.”
PROCEDURE
1.Connect SET and host computer.
2.Select "JOB" in Memory Mode.
3.Select "Comms output" to display the JOB list.
4.Select the JOB to be output and press { 
}.
"Out" appears to the right of the JOB selected. You can select as many JOBs as you want.
•" " means that the JOB has not been output to an external device yet.
5.Press 
.
6.Select the output format and press
{ 
}.
Output starts. When the output is complete, the JOB list is restored. It is possible to continue output of the next JOB.
*JOB01 |
Out |
||
|
ATUGI |
254 |
|
|
JOB03 |
Out |
|
|
JOB04 |
0 |
|
|
JOB05 |
0 |
|
|
|
||
Comms output SDR
Printed output
101
23. OUTPUTTING JOB DATA
• To stop output, press {ESC}.
PROCEDURE Outputting JOB data to printer
1.Select “JOB” in Memory Mode.
2.Select “Comms output” to display the JOB list.
3.Select the JOB to be output and press { 
}.
“Out” appears to the right of the JOB selected. You can select as many JOBs as you want.
4.Press 
.
5.Connect SET and printer.
6.Turn ON the printer.
7.Select "Printed output" and press { 
}. Output starts. When the output is complete, the JOB list is restored. It is possible to continue output of the next JOB.
102