- •Preface
- •Table of contents
- •1 Description of the device
- •1.1 Product characteristics
- •1.2 PROFIBUS interface
- •1.3 Meaning of the LED display
- •2 Software installation
- •2.1 Installing the SIMATIC NET PC software
- •2.2 Uninstalling the SIMATIC NET PC software
- •2.3 Alternative software packets
- •3 Hardware installation
- •3.1 Safety notices
- •3.2 Installing hardware
- •3.3 Hardware compatibility
- •4 Configuration
- •5 Technical specifications
- •Index
SIMATIC NET
PG/PC - PROFIBUS CP 5612
Operating Instructions
12/2012
___________________
Preface
Description of the device |
1 |
|
|
Software installation |
2 |
|
|
Hardware installation |
3 |
|
|
Configuration |
4 |
|
|
Technical specifications |
5 |
|
|
Approvals |
A |
|
|
C79000-G8976-C278-02
Legal information
Warning notice system
This manual contains notices you have to observe in order to ensure your personal safety, as well as to prevent damage to property. The notices referring to your personal safety are highlighted in the manual by a safety alert symbol, notices referring only to property damage have no safety alert symbol. These notices shown below are graded according to the degree of danger.
DANGER
indicates that death or severe personal injury will result if proper precautions are not taken.
WARNING
indicates that death or severe personal injury may result if proper precautions are not taken.
CAUTION
indicates that minor personal injury can result if proper precautions are not taken.
NOTICE
indicates that property damage can result if proper precautions are not taken.
If more than one degree of danger is present, the warning notice representing the highest degree of danger will be used. A notice warning of injury to persons with a safety alert symbol may also include a warning relating to property damage.
Qualified Personnel
The product/system described in this documentation may be operated only by personnel qualified for the specific task in accordance with the relevant documentation, in particular its warning notices and safety instructions. Qualified personnel are those who, based on their training and experience, are capable of identifying risks and avoiding potential hazards when working with these products/systems.
Proper use of Siemens products
Note the following:
WARNING
Siemens products may only be used for the applications described in the catalog and in the relevant technical documentation. If products and components from other manufacturers are used, these must be recommended or approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation and maintenance are required to ensure that the products operate safely and without any problems. The permissible ambient conditions must be complied with. The information in the relevant documentation must be observed.
Trademarks
All names identified by ® are registered trademarks of Siemens AG. The remaining trademarks in this publication may be trademarks whose use by third parties for their own purposes could violate the rights of the owner.
Disclaimer of Liability
We have reviewed the contents of this publication to ensure consistency with the hardware and software described. Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the information in this publication is reviewed regularly and any necessary corrections are included in subsequent editions.
Siemens AG |
Order number: C79000-G8976-C278 |
Copyright © Siemens AG 2012. |
Industry Sector |
12/2012 Technical data subject to change |
All rights reserved |
Postfach 48 48 |
|
|
90026 NÜRNBERG |
|
|
GERMANY |
|
|
Preface
What the consignment contains
The following components are supplied with the CP 5612: ● CP 5612 communications processor
Please check that the consignment you have received is complete. If it is not complete, please contact your supplier or your local Siemens office.
Validity of this documentation
These operating instructions are valid for the following product:
●CP 5612
order number: 6GK1 561-2AA00
Content of this documentation
These operating instructions contain information about the installation and configuration of the CP 5612 communications processor.
Updated operating instructions on the Internet
You will find the current version of these operating instructions on the Product Support pages under the following entry ID:
58826992 (http://support.automation.siemens.com/WW/view/en/58826992)
Further documentation
The documents listed below contain more detailed information on commissioning and using the communications processor. You will find this documentation on the Product Support pages on the Internet under the following entry link:
Support (http://support.automation.siemens.com/WW/view/en)
Enter the entry ID shown below of the relevant manual as the search item.
CP 5612 |
|
Operating Instructions, 12/2012, C79000-G8976-C278-02 |
3 |
Preface
●Configuration manual Commissioning PC Stations
This provides you with detailed information on commissioning and configuring SIMATIC NET PC communications modules.
Entry ID:
13542666 (http://support.automation.siemens.com/WW/view/en/13542666)
●System manual SIMATIC NET Industrial Communication with PG/PC
–Volume 1– Basics
Entry ID:
42783968 (http://support.automation.siemens.com/WW/view/en/42783968)
–Volume 2– Interfaces
Entry ID:
42783660 (http://support.automation.siemens.com/WW/view/en/42783660)
The system manuals introduce the topic of industrial communication and explain the communications protocols used. There is also a description of the OPC interface as user programming interface.
●Installation manual SIMATIC NET PC Software
This document contains detailed information on installing the SIMATIC NET PC software.
Entry ID:
61630923 (http://support.automation.siemens.com/WW/view/en/61630923)
●System manual PROFIBUS Network Manual
In this document you will find detailed information about setting up a PROFIBUS network.
Entry ID:
35222591 (http://support.automation.siemens.com/WW/view/en/35222591)
SIMATIC NET documentation
You will find the entire SIMATIC NET documentation on the pages of Product Support: 10805878 (http://support.automation.siemens.com/WW/view/en/10805878)
Go to the required product group and make the following settings: → Entry list → Entry type "Manuals / Operating Instructions"
Online support
In addition to our product documentation, the comprehensive online information platform supports you in all aspects of our Service & Support at any time and from any location in the world. You will find this on the Internet at the following address:
(http://support.automation.siemens.com/WW/llisapi.dll?func=cslib.csinfo2&aktprim=99&lang= en)
Here, you will find the following information:
|
CP 5612 |
4 |
Operating Instructions, 12/2012, C79000-G8976-C278-02 |
Preface
●Support news, newsletter
●Product information, Product Support, Applications & Tools
●Technical Forum
●Access to other features of our Service & Support offer:
–Technical Consulting
–Engineering Support
–Field Service
Phone: +49 (0)911 895 7444
–Spare parts and repairs Phone: +49 (0)911 895 7448
–Optimization and modernization
–Technical Support
Expert advice on technical questions with a wide range of demand-optimized services for all our products and systems.
Phone: +49 (0)911 895 7222
(https://support.automation.siemens.com/WW/llisapi.dll?func=cslib.csinfo&lang=en&ob jid=38718979&caller=view)
You will find contact data on the Internet at the following address: (http://www.automation.siemens.com/partner/guiwelcome.asp?lang=en)
SITRAIN - Siemens training for automation and industrial solutions
With over 300 different courses, SITRAIN covers the entire Siemens product and system spectrum in the field of automation and drive technology. Advanced training tailored to your needs is also available. In addition to our classic range of courses, we also offer a combination of various training media and sequences. You can, for example, use self-study programs on CD-ROM or on the Internet as preparation or to consolidate training.
You will find detailed information on our training curriculum and how to contact our customer consultants at the following Internet address:
(www.siemens.com/sitrain)
SIMATIC NET glossary
Explanations of the specialist terms used in this documentation can be found in the SIMATIC NET glossary.
You will find the SIMATIC NET glossary here:
●SIMATIC NET Manual Collection
The DVD ships with certain SIMATIC NET products.
●On the Internet under the following entry ID:
50305045 (http://support.automation.siemens.com/WW/view/en/50305045)
CP 5612 |
|
Operating Instructions, 12/2012, C79000-G8976-C278-02 |
5 |
Preface
|
CP 5612 |
6 |
Operating Instructions, 12/2012, C79000-G8976-C278-02 |