SECTION 9: PROCEDURES

9.1ARRIVALS AND DEPARTURES

Load and Activate a Departure Procedure

1)Press the PROC Key.

2)Turn the large FMS Knob to highlight ‘SELECT DEPARTURE’.

3)Press the ENT Key.

4)If a flight plan is active, the departure airport is displayed as the default. A list of available departures is also displayed. If no flight plan is active, use the FMS Knobs to enter the identifier of the desired airport. Press the ENT Key.

5)Turn the large FMS Knob to highlight the Departure field. Turn the small FMS Knob to display a list of available departures.

6)TurneitherFMSKnobtoselectthedesireddeparture and press the ENT Key.

Figure 9-1 Select Departure

7)A list of runways may be displayed for the departure. Turn either FMS Knob to select the desired runway and press the ENT Key.

8)A list of available transitions is displayed for the departure. Turn either FMS Knob to highlight the desired transition waypoint and press the ENT Key.

SECTION 9 – PROCEDURES

Figure 9-2 Select Departure Transition

9)With ‘LOAD?’ highlighted, press the ENT Key. The departure is active when the flight plan is active.

Load and Activate An Arrival Procedure

NOTE: If any portion of an arrival procedure is the active leg of a flight plan,the existing arrival procedure must be deleted before changing to a different arrival procedure.

1)Press the PROC Key.

2)Turn the large FMS Knob to highlight ‘SELECT ARRIVAL’.

3)Press the ENT Key.

4)If a flight plan is active, the destination airport is displayed as the default. A list of available arrivals is also displayed. If no flight plan is active, use the FMS Knobs to enter the identifier of the desired airport. Press the ENT Key.

5)Turn the large FMS Knob to highlight the Arrival field. Turn the small FMS Knob to display a list of available arrivals.

6)Turn either FMS Knob to select the desired arrival and press the ENT Key.

190-00384-08 Rev.A

Garmin G1000 Cockpit Reference Guide for the Cessna Nav III

9-1