General Commands

2.6NV parameters

There is one NV Parameters command, listed below.

2.6.1nvset

The nvset command sets nonvolatile parameters. On execution, nvset saves the current configuration to webport.nv.

This command is included in the menu list if INCLUDE_NVPARAMS was defined in ipport.h.

Syntax

nvset

Example

INET> nvset

INET> _

Usage

The nvset command calls nv_writeflash, as described in the Porting TCP

Programmer’s Guide.

2-24

Copyright © 2000-2001 ARM Limited. All rights reserved.

ARM DUI 0145B

Chapter 3

Diagnostic Commands

This chapter lists the commands that are used diagnostics and debugging. It contains the following sections:

•General diagnostic commands on page 3-2

•Statistics commands on page 3-14

•DNS commands on page 3-18

•TCP commands on page 3-20

•Modem commands on page 3-26

•HTTP commands on page 3-28

•PPP commands on page 3-31

•Memory command on page 3-34

•IP commands on page 3-35

•SNMP command on page 3-38.

ARM DUI 0145B

Copyright © 2000-2001 ARM Limited. All rights reserved.

3-1