Overview of the Command-Line Interface

1.4Sample session

As an introduction, a short annotated session transcript is reproduced here:

•The host command sets a default remote host IP address for those commands that require a remote host to be specified.

INET> host 10.0.0.5

active host number set to 10.0.0.5

•The ping command checks if a host is reachable or not.

INET> ping

ping 0 to 10.0.0.5: ping 1 sent...

got ping reply; len:62 seq 0 from 10.0.0.5

•The quit (or qui) command is invoked and the execution ends.

INET> q

ARM DUI 0145B

Copyright © 2000-2001 ARM Limited. All rights reserved.

1-5

Overview of the Command-Line Interface

1-6

Copyright © 2000-2001 ARM Limited. All rights reserved.

ARM DUI 0145B

Chapter 2

General Commands

This chapter describes general commands. It contains the following sections:

•General commands on page 2-2

•UDP Echo commands on page 2-11

•TCP Echo commands on page 2-16

•PPP commands on page 2-21

•SNMP commands on page 2-23

•NV parameters on page 2-24.

ARM DUI 0145B

Copyright © 2000-2001 ARM Limited. All rights reserved.

2-1