Добавил:
Upload Опубликованный материал нарушает ваши авторские права? Сообщите нам.
Вуз: Предмет: Файл:
111 / da-42NGnew / DA42-NG-AFM-r1.pdf
Скачиваний:
203
Добавлен:
20.04.2015
Размер:
2.96 Mб
Скачать

DA 42 NG AFM

Handling, Care,

Maintenance

8.3 AIRPLANE ALTERATIONS OR REPAIRS

Alterations or repairs to the airplane may be carried out only according to the Airplane

Maintenance Manual, Doc. No. 7.02.15, and only by authorized personnel.

8.4 SERVICING

8.4.1 REFUELING

WARNING

Do not allow fire, sparks or heat near fuel. Fuel burns violently and can cause injury to persons and damage to the airplane.

WARNING

Do not get fuel on your skin. Fuel can cause skin disease.

WARNING

Connect the airplane and the fuel supply vehicle to electrical ground before refueling. If you do not ground the airplane, static electricity can cause fire during refueling.

WARNING

Make sure that a suitable fire extinguisher is available at all times during refueling.

WARNING

Turn off all ground equipment in the refueling area.

WARNING

Do not operate electrical switches in the airplane during refueling.

Doc. No. 7.01.15-E

Rev. 1

18-Feb-2009

 

Page 8 - 3

 

 

 

 

 

Handling, Care,

DA 42 NG AFM

Maintenance

CAUTION

Use only approved fuel types given in Chapter 2.

1.Ground the airplane and the fuel supply vehicle electrically.

2.Remove the fuel filler cap (located on top of the outer wing). Check cap retaining cable for damage.

3.Refuel the airplane.

4.Install the fuel filler cap.

5.Repeat steps 2 to 4 for the other wing.

6.Remove the ground cable from the airplane and the fuel supply vehicle.

8.4.2 ENGINE OIL LEVEL CHECK

1.Open the inspection door on top of the upper left cowling.

2.Remove the filler cap.

3.Clean the oil dip-stick.

4.Install the filler cap.

5.Remove the filler cap again.

6.Read the oil level from the dip-stick.

7.If necessary, add engine oil and repeat steps 3 to 6.

8.Install the filler cap.

9.Close the inspection door.

10.Repeat steps 1 to 9 for the other engine.

8.4.3 GEARBOX OIL LEVEL CHECK

1.Open the inspection door on the forward left side of the lower cowling.

2.Check gearbox oil level in inspection window.

3.Close the inspection door.

4.Repeat steps 1 to 3 for the other engine.

Page 8 - 4

Rev. 1

18-Feb-2009

Doc. No. 7.01.15-E

 

 

 

 

DA 42 NG AFM

Handling, Care,

Maintenance

8.4.4 TIRE INFLATION PRESSURE CHECK

1.Remove dust cap from valve stem by turning counterclockwise.

2.Connect tire gauge to valve stem, read pressure.

3.Correct pressure if necessary (nose tire 6.0 bar/87 psi, main tires

4.7 bar/68 psi).

4.Install dust cap on valve stem by turning clockwise.

Doc. No. 7.01.15-E

Rev. 1

18-Feb-2009

 

Page 8 - 5

 

 

 

 

 

Соседние файлы в папке da-42NGnew