Chapter 1		INTRODUCTION
		Required Files
	Table 1-10: Summary of Mapping Tutorial files
	File Name	Description
		Surface of the engine geometry, with different cell
	geometry.dbs	types assigned to the combustion dome, piston,
		cylinder wall, each port and valve
	exhaust.dbs	Volume mesh of the exhaust port, generated using
		the pro-STAR AutoMesh module
	vlift01.dat	Valve lift profile (in millimetres) as a function of
	vlift02.dat	crank angle
	cylinder-3600.dat	A table of fluid pressure and temperature as a
	intake-3600.dat	function of crank angle. This information is used
	exhaust-3600.dat	to set initial and boundary conditions.

ELSA Tutorial files

The files required for the ELSA tutorial are shown in Table 1-11 and can be found in the following directory:

$STARDIR/STARCDTUTS/4.20/generic/es-ice/ELSA

Table 1-11: Summary of Mapping Tutorial files

	File Name	Description
	bowl.dbs	Surface of the piston bowl geometry
	injection.tbl	pro-STAR table file defining the injection mass
		flow rate as a function of crank angle
	injector_hole.spl	Spline defining the position and dimensions of the
		injector hole
	ufile/dropro.f	User coding defining droplet properties

Records showing progress thorough each tutorial in this volume are saved intermittently to es-ice model files. These files are available from the Product Updates section of the CD-adapco User Services site, should you wish to validate your progress or skip chapters. The start of each chapter also lists all files required to complete that chapter.

A description of the steps needed to generate the volume mesh for the exhaust port or the manifolds is not included in the Tutorial or User Guide volumes. It is assumed that you have enough experience in using pro-STAR or STAR-CCM+ to perform these operations.

Version 4.20

1-9