Make a Sampler Using REAKTOR Modules

Making the Connections

2. Repeat this process for the D, S, and R Inputs of the Envelope. Now our Structure should look like this:

8.4Making the Connections

Now we need to connect the Sampler to our Outputs, and the Gate and NotePitch Modules need to be connected to the Sampler and ADSR-Env, using click / hold and drag.

REAKTOR 5.5 - Getting Started Guide - 119

Make a Sampler Using REAKTOR Modules

Making the Connections

8.4.1Connecting the Sampler to the 2 Audio Voice Combiners

1.Click on the Out dot of the Sampler, hold the mouse button down, and drag the wire to left Audio Voice Combiner.

2.When you have reached the black dot In of the Audio Voice Combiner, let go of your mouse button. The wire should connect.

3.Repeat the same procedure for the right Audio Voice Combiner.

Again, the yellow lamp confirms the connection!

Fig. 8.4 Sampler connected to Audio Voice Combiners

8.4.2Connecting the NotePitch and Gate Modules

1.Click/hold on the red dot of the NotePitch Module, and drag the wire to the P (Pitch) Input of the Sampler.

2.Let go when you touch the red dot.

3.Repeat the same procedure for the Gate Module, which needs to be connected to the

Trig Input of the Sampler and the G (Gate) Input of the ADSR-Env.

Your Structure will now look something like this:

REAKTOR 5.5 - Getting Started Guide - 120