24 - 30 HEATING AND AIR CONDITIONING		Ä

CAUTION: The high pressure cut-out switch service kit has two snap rings. One is black and the other is silver. Use the one which has the same color as the original one in the compressor.

Fig. 4 Shaft Seal Protector

Fig. 5 Install Shaft Seal

COMPRESSOR HIGH PRESSURE CUT-OUT SWITCH

REMOVAL AND INSTALLATION

(1)Discharge the refrigerant system.

(2)Disconnect wire connector from the high pressure cut-out switch (Fig. 6).

Fig. 6 High Pressure Cut-out Switch

(3) Remove snap ring securing the switch in the compressor end cover (Fig. 7).

Fig. 7 Remove or Install Snap Ring

(4) Pull switch straight out from end cover. Remove and discard used O-ring seal (Fig. 8).

Fig. 8 Remove or Install High Pressure Cut-out Switch

To install, reverse the preceding operation using a new O-ring seal. Evacuate and charge the refrigerant system.

COMPRESSOR HIGH PRESSURE RELIEF VALVE

REMOVAL AND INSTALLATION

(1)Discharge the refrigerant system.

(2)Rotate the high pressure relief valve counterclockwise and separate relief valve from the vehicle (Fig. 9).

To install, reverse the preceding operation using a new O-ring seal. Evacuate and charge the refrigerant system.