Refer to the back of this manual for Factory Service and Technical Support contact information

4.10Overview of Web Interface

Refer to Chapter 9 to establish remote communications, then launch Internet Explorer 6 or greater. Under Tools\Internet Options\Security, add the logon address of the CXC to the “Trusted Sites.”

Logon to address 10.10.10.201

Figure 18–Enter Network Password window

Enter no USER NAME and default PASSWORD. Select OK to proceed to Language Selection window:

Figure 19–Language Selection window

The following images show examples of windows presented when using a desktop browser to set-up or monitor the CXC – contact Alpha for assistance as required.

0350046-J0 Rev C

Page 28 of 127

Visit the Alpha website at www.alpha.ca for the latest manual and product downloads

Figure 20–Web Interface window (sample home page)

0350046-J0 Rev C

Page 29 of 127

Refer to the back of this manual for Factory Service and Technical Support contact information

4.10.1SNTP (Simple Network Time Protocol)

This feature enables synchronization of the CXC device time with an external source; i.e., the user’s network. SNTP is an adaptation or basic subset of NTP which is used for more comprehensive device time synchronization (see www.NTP.org).

CAUTION

The CXC SNTP client will only accept responses from the external server with the ‘stratum’ parameter set in the range of 1 through 14.

With the web interface, select the Controller page and then the Date & Time window:

Toggle the check box to

Enable SNTP Service

Enter target network address for SNTP source

Figure 21–Date & Time window (Controller page)

To verify the Date/Time properties of the PC, select Start, Settings then Control Panel (Windows® 2000 operating system). Select Date/Time and verify properties with the target network:

Select the tab for Time Zone

Use the pull-down menu to select the correct time zone; e.g. Pacific Time

In this example, the Time Zone

Adjustment for the CXC is –8:00

				Use the “-“ button in addition to the
				pull-down menu to change the Time
				Zone Adjustment,
				then select Get Time Now to
				synchronize
	Figure 22–Example of time zone adjustment

Select Get Time Now to synchronize.

NOTE: SNTP service will automatically re-synchronize twenty-four hours from the time of the last synchronization.

0350046-J0 Rev C

Page 30 of 127