Ä		TRANSAXLE 21 - 19

Fig. 5 Intermediate Shaft Assembly

SYNCHRONIZERS

Fig. 1 1-2 and 3-4 Synchronizer Sleeves and Hubs

21 - 20 TRANSAXLE		Ä

Fig. 2 5th Speed Synchronizer

Fig. 3 Synchronizer Identification

CAUTION: 1-2 synchronizer assembly components must NOT be interchanged with any other synchronizer assembly, or with previous model years transaxles; they will NOT function correctly.

Ä		TRANSAXLE 21 - 21

Fig. 4 Synchronizers

GEARSHIFT HOUSING

Fig. 1 Gearshift Housing Disassembled

21 - 22 TRANSAXLE		Ä

Fig. 2 Remove or Install Roll Pin and Lever

Fig. 5 Install Oil Seal

Roll pin must be flush with top of lever.

The C-Clip groves in the selector shaft will damage the oil seal. Install oil seal after selector shaft is installed. Always use a new oil seal when selector shaft is removed.

Fig. 3 Dust Boot

Fig. 6 Remove Vent Cap

Fig. 4 Remove Oil Seal

Fig. 7 Crossover Shaft Roll Pin

Ä		TRANSAXLE 21 - 23

Fig. 8 5-R Blocker Attaching Bolts

Proper torque to the 5-R blocker attaching bolts is very important (Fig. 8).

Fig. 9 5-R Blocker Assembly

Fig. 10 Crossover Shaft

Fig. 11 Selector Shaft C-Clip

For Disassembly: Drive roll pin out far enough to clear the selector shaft, but pin must remain in the selector so not to break the housing.

Fig. 12 Selector Shaft C-Clip

Fig. 13 Selector Assembly Roll Pin