176

Connecting to a TV

Shooting/Playback Using a TV

You can use the supplied AV cable to shoot or playback images using a TV.

1	Turn off the camera and the TV.
2	Connect the AV cable to the
	camera’s A/V OUT terminal.
	• Hook your fingernail or the wrist
	strap toggle under the bottom edge
	of the camera’s terminal cover to
	open it, then insert the AV cable all
	the way into the connector.
3	Plug the other ends of the	VIDEO	AUDIO
	AV cable to the VIDEO IN	Yellow
	and AUDIO IN jacks on the
	TV.
			Black

4 Turn on the TV and switch it to video mode.

5 Turn on the camera.

z The video output signal can be switched (NTSC or PAL) to accommodate different regional standards (p. 56). The default setting varies between regions.

-NTSC: Japan, U.S.A., Canada, Taiwan and others

-PAL: Europe, Asia (excluding Taiwan), Oceania and others

zIf the video system is set incorrectly, the camera output may not display properly.