13-6 SUSPENSION

Specifications

	Item			Standard
	Front Fork (Per One Unit)
	Fork Inner Tube Diameter			41 mm (1.6 in.)
	Air Pressure	Atmospheric pressure (Non-adjustable)
	Rebound Damper Setting	4 turns out from the fully clockwise position
		(Usable Range: 0 ←→ 5 1/2 turns out)
	Compression Damper Setting	5 1/2 turns out from the fully clockwise position
		(Usable Range: 0 ←→ 7 turns out)
	Fork Spring Preload Setting	4 turns in from the fully counterclockwise position
		(Usable Range: 0 ←→ 15 turns in)
	Fork Oil:
	Viscosity	SHOWA SS05 or equivalent SAE 5W
	Amount	Approx. 370 mL (12.5 US oz.) (when changing oil)
		433 ±2.5 mL (14.6 ±0.085 US oz.) (after disassembly and
		completely dry)
	Fork Oil Level	80 ±2 mm (3.15 ±0.08 in.) (fully compressed, below from
		the top of outer tube)
	Fork Spring Free Length	235 mm (9.25 in.) (Service Limit: 230 mm (9.06 in.))
	Rear Shock Absorber
	Rebound Damper Setting	15th click from the first click of the fully clockwise position
		(Usable Range: 0 ←→ 21 clicks)
	Compression Damper Setting:
	High Speed	3 turns out from the fully clockwise position
		(Usable Range: 0 ←→ 4 turns out)
	Low Speed	3 turns out from the fully clockwise position
		(Usable Range: 0 ←→ 5 turns out)
	Spring Preload Setting Position:
	Standard	Spring length: 179 mm (7.05 in.)
	Usable Range	Spring length: 179 190 mm (7.05 7.48 in.) (stronger to
		weaker)
	Gas Pressure	980 kPa (10.0 kgf/cm², 142 psi, Non-adjustable)

SUSPENSION 13-7

Special Tools

Inside Circlip Pliers: 57001-143

Fork Oil Level Gauge: 57001-1290

Oil Seal & Bearing Remover: 57001-1058

Bearing Remover Head, 20 × 22: 57001-1293

Bearing Driver Set: 57001-1129

Bearing Remover Shaft, 13: 57001-1377

Jack:		Hook Wrench T=3.2 R37:
57001-1238	57001-1539

Fork Oil Seal Driver, 41: 57001-1288

Swingarm Pivot Nut Wrench: 57001-1597

13-8 SUSPENSION

Special Tools

Jack Attachment: 57001-1608

Hook Wrench: 57001-1641

Needle Bearing Driver, 17/18: 57001-1609

Needle Bearing Driver, 20 & Spacer, 28: 57001-1678

Needle Bearing Driver, 28: 57001-1610

Top Plug Wrench (45 mm): 57001-1741

Spacer, 18: 57001-1636

Box Wrench (27 mm): 57001-1742

Spacer, 28: 57001-1637