PERIODIC MAINTENANCE 2-37

Periodic Maintenance Procedures

If it does not go on, inspect or replace the following parts. Battery (see Charging Condition Inspection in the Electrical System chapter)

Brake Light (LED) (see Tail/Brake Light (LED) Removal Installation in the Electrical System chapter)

Main Fuse 30 A and Taillight Fuse 10 A (see Fuse Inspection in the Electrical System chapter)

Front Brake Light Switch [A] (see Switch Inspection in the Electrical System chapter)

Rear Brake Light Switch (see Switch Inspection in the Electrical System chapter)

Harness (see Wiring Inspection in the Electrical System chapter)

Suspension

Front Forks/Rear Shock Absorber Operation Inspection

•Pump the forks down and up [A] 4 or 5 times, and inspect the smooth stroke.

If the forks do not smoothly or noise is found, inspect the fork oil level or fork clamps (see Front Fork Oil Change in the Suspension chapter).

•Pump the rear seat down and up [A] 4 or 5 times, and inspect the smooth stroke.

If the shock absorber does not smoothly stroke or noise is found, inspect the oil leak (see Rear Shock Absorber Oil Leak Inspection).

Front Fork Oil Leak Inspection

•Visually inspect the front forks [A] for oil leakage. Replace or repair any defective parts, if necessary.