Добавил:
Upload Опубликованный материал нарушает ваши авторские права? Сообщите нам.
Вуз: Предмет: Файл:
G1000 / G1000_CessnaNavIII_PilotsGuide_SystemSoftwareVersion0563.03orlater_.pdf
Скачиваний:
127
Добавлен:
18.04.2015
Размер:
37.35 Mб
Скачать

GPS NAVIGATION

5.3 PFD INSET MAP AND WINDOWS

INSET MAP

NOTE: The Inset Map is removed from the PFD any time aircraft pitch is greater than +30° or less than –20°, or when a 65° bank angle is reached.

NOTE: Inset Map operations involving the display of traffic, terrain, and weather data are discussed in the Hazard Awareness section.

Figure 5-21 PFD Inset Map

The Inset Map can be displayed in the lower left corner of the PFD by pressing the INSET Softkey. Inset Map features are enabled on the MFD (refer to the Navigation Map Setup Section for details).

The Inset Map Pop-up window can display the following information:

Moving map

Zoom scale legend

Orientation

Aircraft icon

Topographic data

Traffic data

Weather data

Terrain data

Indication of which map features are enabled

Active flight plan

Track vector

Wind direction/speed

Latitude/longitude lines

NAV range ring

Fuel range ring (reserve; the fuel reserve rings are enabled and disabled from the MFD only)

Obstacle data

5-28

Garmin G1000 Pilot’s Guide for Cessna Nav III

190-00498-02 Rev.A

GPS NAVIGATION

The following Inset Map operations can be performed (operations are performed independently of the MFD):

Changing the zoom range

Changing the declutter level

Map panning

Topo

Traffic

Terrain

Stormscope

To change the Inset Map zoom range, turn the Joystick clockwise to increase or counterclockwise to decrease the range. Zoom ranges from 500 feet to 2,000 nm. To change the declutter level, press the INSET Softkey and press theDCLTR Softkey to remove background map details until the desired amount of detail is displayed. The declutter level appears in the Softkey (i.e., DCLTR-1).

Panning the map:

1)Push in the Joystick to display the map pointer. The map can now move beyond its current limits without adjusting the range.

2)Move the Joystick to pan the map in the general direction of the desired location. When the pointer is placed on an object, the name of the object is highlighted for approximately 4 seconds (even if the name was not originally displayed on the map). This feature applies to everything displayed on the map except for route lines.

3)Push in the Joystick to cancel the panning function and return to the present position on the map.

190-00498-02 Rev.A

Garmin G1000 Pilot’s Guide for Cessna Nav III

5-29

GPS NAVIGATION

PFD WINDOWS

PFD windows are displayed in the lower right corner of the PFD. PFD windows can display different types of information, the discussion in this section of the pilot’s guide is limited to the following windows that pertain to GPS navigation:

Nearest Airports

Direct-to

Flight Plan

Procedures

PFD

Window

Location

Figure 5-22 PFD Window Location

5-30

Garmin G1000 Pilot’s Guide for Cessna Nav III

190-00498-02 Rev.A