- •Section 1 System Overview
- •1.1 System Description
- •1.2 Line Replaceable Units (LRU)
- •1.3 G1000 Controls
- •PFD/MFD Controls
- •Audio Panel Controls
- •1.4 Secure Digital (SD) Cards
- •1.5 System Power-up
- •1.6 System Operation
- •Normal Display Operation
- •Reversionary Display Operation
- •AHRS Operation
- •G1000 System Annunciations
- •Softkey Function
- •GPS Receiver Operation
- •1.7 Accessing G1000 Functionality
- •Menus
- •MFD Page Groups
- •MFD System Pages
- •Electronic Checklists (Optional)
- •1.8 Display Backlighting
- •Automatic Adjustment
- •Manual Adjustment
- •Section 2 flight Instruments
- •2.1 Flight Instruments
- •Airspeed Indicator
- •Attitude Indicator
- •Altimeter
- •Vertical Speed Indicator (VSI)
- •Vertical Deviation, Glideslope, & Glidepath Indicators
- •Horizontal Situation Indicator (HSI)
- •Course Deviation Indicator (CDI)
- •2.2 Supplemental Flight Data
- •Generic Timer
- •Outside Air Temperature
- •Wind Data
- •System Time
- •Vertical Navigation (VNV) Indications
- •2.3 PFD Annunciations and Alerting Functions
- •System Alerting
- •Traffic Annunciation
- •TAWS Annunciations
- •Low Altitude Annunciation
- •Altitude Alerting
- •Minimum Descent Altitude/Decision Height Alerting
- •Marker Beacon Annunciations
- •2.4 Abnormal Operations
- •Abnormal GPS Conditions
- •Unusual Attitudes
- •Section 3 Engine Indication System (EIS)
- •3.1 Engine Display
- •3.2 Lean Display
- •3.3 System Display
- •Section 4 audio panel and CNS
- •4.1 Overview
- •PFD/MFD Controls and Frequency Display
- •Audio Panel Controls
- •4.2 COM Operation
- •COM Transceiver Selection and Activation
- •COM Transceiver Manual Tuning
- •Quick-Tuning and Activating 121.500 MHz
- •Auto-tuning the COM Frequency
- •Frequency Spacing
- •Automatic Squelch
- •Volume
- •4.3 NAV Operation
- •NAV Radio Selection and Activation
- •NAV Receiver Manual Tuning
- •Auto-tuning the NAV Frequency
- •Marker Beacon Receiver
- •DME Tuning (Optional)
- •4.4 GTX 33 Mode S Transponder
- •Transponder Controls
- •Transponder Mode Selection
- •Entering a Transponder Code
- •IDENT Function
- •Flight ID Reporting
- •4.5 Additional Audio Panel Functions
- •Power-Up
- •Mono/Stereo Headsets
- •Speaker
- •Intercom
- •Clearance Recorder and Player
- •Entertainment Inputs
- •4.6 Audio Panel Preflight Procedure
- •4.7 Abnormal Operation
- •Stuck Microphone
- •COM Tuning Failure
- •Audio Panel Fail-Safe Operation
- •Reversionary Mode
- •Section 5 GPS Navigation
- •5.1 Introduction
- •5.2 Navigation Map (MFD)
- •Navigation Map Page
- •5.3 PFD Inset Map and Windows
- •Inset Map
- •PFD Windows
- •5.4 Direct-to-Navigation (MFD)
- •Selecting a Direct-to Waypoint
- •Clearing Vertical Constraints
- •Specifying a Course to a Waypoint
- •Canceling Direct-to Navigation
- •Direct-to Navigation Shortcuts
- •5.5 Direct-to-Navigation (PFD)
- •5.6 Airport Information (MFD)
- •Duplicate Waypoints
- •Additional Airport Runway Information
- •5.7 Intersection Information (MFD)
- •5.8 NDB Information (MFD)
- •5.9 VOR Information (MFD)
- •5.10 User Waypoint Information (MFD)
- •5.11 Nearest Airports (MFD)
- •5.12 Nearest Intersections (MFD)
- •5.13 Nearest NDB (MFD)
- •5.14 Nearest VOR (MFD)
- •5.15 Nearest User Waypoint (MFD)
- •5.16 Nearest Airspaces
- •5.17 Nearest Airports (PFD)
- •5.18 Flight Planning (MFD)
- •Airways/Jetways
- •Display of Airways on the Flight Plan Page
- •Vertical Navigation (VNV)
- •Navigating an Example Flight Plan
- •Parallel Track (PTK)
- •5.19 Flight Planning (PFD)
- •Operations
- •5.20 Procedures (MFD)
- •Leg Types Supported by the G1000
- •5.21 Procedures (PFD)
- •Operations
- •5.22 ABNORMAL OPERATION
- •Dead Reckoning
- •Section 6 Hazard Avoidance
- •6.1 XM Satellite Weather (Service Optional)
- •Activating XM Satellite Services
- •Using XM SATELLITE Weather Products
- •Weather Softkeys on the Weather Data Link Page
- •Setting Up the Weather Data Link Page
- •XM Satellite Weather on the Navigation Map
- •6.2 WX-500 Stormscope (Optional)
- •Setting Up Stormscope on the Navigation Map
- •Selecting the Stormscope Page
- •6.3 Terrain Proximity
- •Requirements
- •GPS Position and GPS-MSL Altitude
- •Displaying Terrain Proximity Data
- •Terrain Proximity Symbols
- •Terrain Proximity Page
- •Navigation Map Page
- •6.4 TAWS (Optional)
- •Requirements
- •TAWS Alerting
- •Using TAWS
- •TAWS Symbols
- •TAWS Alerts
- •6.5 Traffic
- •Traffic Information Service (TIS)
- •Honeywell KTA 870 TAS System (Optional)
- •ADS-B Traffic (Optional)
- •Section 7 Automatic Flight Control System
- •7.1 AFCS Controls
- •7.2 Flight Director Operation
- •Command Bars
- •Activating the Flight Director
- •7.3 Flight Director Modes
- •Pitch Modes
- •Roll Modes
- •7.4 Autopilot Operation
- •Engaging the Autopilot
- •Control Wheel Steering
- •Disengaging the Autopilot
- •7.5 Example Procedures
- •Departure
- •Intercepting a VOR Radial
- •Flying a Flight Plan/GPS Course
- •Descent
- •Approach
- •Go Around/Missed Approach
- •7.6 AFCS Annunciations and Alerts
- •AFCS Status Alerts
- •Overspeed Protection
- •Section 8 Additional Features
- •8.1 SafeTaxi
- •SafeTaxi Cycle Number and Revision
- •8.2 ChartView
- •ChartView Softkeys
- •Terminal Procedures Charts
- •Chart Options
- •Day/Night View
- •ChartView Cycle Number and Expiration Date
- •8.3 FliteCharts
- •FliteCharts Softkeys
- •Terminal Procedures Charts
- •Chart Options
- •Day/Night View
- •FliteCharts Cycle Number and Expiration Date
- •8.4 XM Radio Entertainment (Optional)
- •XM Satellite Radio Service
- •XM Service Activation
- •Using XM Radio
- •Automatic Audio Muting
- •8.5 Abnormal Operation
- •Annunciations and Alerts
- •Alert Level Definitions
- •NAV III Aircraft Alerts
- •CO Guardian Messages
- •G1000 System Annunciations
- •Other G1000 Aural Alerts
- •G1000 System Message Advisories
- •AFCS Alerts
- •TAWS ALERTS
- •TAWS System Status Annunciations
- •SD Card Use
- •Jeppesen Databases
- •Garmin Databases
- •Glossary
- •Frequently Asked Questions
- •General TIS Information
- •Introduction
- •TIS vs. TAS/TCAS
- •TIS Limitations
- •Map Symbols
- •Index
ADDITIONAL FEATURES
8.4 XM RADIO ENTERTAINMENT (OPTIONAL)
NOTE: Refer to the Hazard Avoidance Section for information about XM Weather products.
The optional XM Radio entertainment feature of the GDL 69A Data Link Receiver is available for the pilot’s and passengers’enjoyment. XMRadiocanbereceivedbysubscriptionthroughouttheContinentalU.S. Entertainment audio is not available on the GDL 69 Data Link Receiver. The XM Radio entertainment feature of the Data Link Receiver is explained in this section.
XM SATELLITE RADIO SERVICE
XM Satellite Radio offers a variety of radio programming over long distances without having to constantly search for new stations. Based on signals from satellites, coverage far exceeds land-based transmissions. Visit www.xmradio.com for more information about XM Radio.
Entertainment audio must be set up with the MFD softkeys.
If problems occur, ensure that the owner/operator of the aircraft has subscribed to XM Radio service, and that the XM subscription has been activated. If a failure still exists, elementary diagnostic checks of the datalink receiver system are explained in Abnormal Operation at the end of this section.
190-00498-02 Rev A |
Garmin G1000 Pilot’s Guide for Cessna Nav III |
8-47 |
ADDITIONAL FEATURES
XM SERVICE ACTIVATION
NOTE: The LOCK Softkey on the XM Information Page (Auxiliary Page Group) is used to save GDL 69A activation data when the XM services are initially set up. It is not used during normal XM Radio operation, but there should be no adverse effects if inadvertently selected during flight. Refer to the GDL 69/69A XM Satellite Radio Activation Instructions (190-00355-04, Rev F or later) for further information.
The XM Information Page provides XM Radio identification numbers, service level, and weather products.
Selecting the XM Information Page:
1)Turn the large FMS Knob to select the Auxiliary Page Group.
2)Turn the small FMS Knob to select theAUX - XM Information Page (fifth page of six in theAUX Group). RADIO and INFO Softkeys are displayed.
3)Press the INFO Softkey to show Radio IDs, Service Class, and Weather Products.
Data |
|
Audio |
||
Radio ID |
|
|
|
Radio ID |
Weather
Products
Window
RADIO |
|
|
LOCK Softkey |
||
|
|
is Used to Save |
|||
and INFO |
|
|
|
|
|
|
|
|
Activation Data |
||
Softkeys |
|
|
|||
Figure 8-57 XM Information Page |
|
During Initial Setup |
|||
|
|
|
|
||
|
|
|
|
|
Each Data Link Receiver is assigned unique Data and Audio Radio IDs that allow XM to communicate with the receiver. To activate XM service, the appropriate Radio ID(s) must be provided to XM to authorize the installed services for that receiver. If XM weather services have not been activated, all the weather product boxes are cleared on the XM Information Page and a yellow ‘Activation Required’ message shows up in the center of the Weather Data Link Page (Map Page Group).
The ‘Service Class’ refers to the groupings of weather products available for subscription.
8-48 |
Garmin G1000 Pilot’s Guide for Cessna Nav III |
190-00498-02 Rev A |
ADDITIONAL FEATURES
USING XM RADIO
The XM Radio Page provides information and control of the audio entertainment features of the XM Satellite Radio.
Selecting the XM Radio Page:
1)Turn the large FMS Knob to select the Auxiliary Page Group.
2)Turn the small FMS Knob to select the displayed AUX - XM Information Page.
3)Press the RADIO Softkey to show the XM Radio Page where audio entertainment is controlled.
Active
Channel
Channel
List
Categories |
|
|
|
Volume |
Field |
|
|
|
Field |
|
|
Figure 8-58 XM Radio Page |
190-00498-02 Rev A |
Garmin G1000 Pilot’s Guide for Cessna Nav III |
8-49 |
ADDITIONAL FEATURES
ACTIVE CHANNEL AND CHANNEL LIST
The Active Channel Box on the XM Radio Page displays the currently selected channel that the XM Radio is using.
The Channels List Box of the XM Radio Page shows a list of the available channels for the selected category. Channels can be stepped through one at a time or may be selected directly by channel number.
Stepping through channels one at a time:
1)While on the XM Radio Page, press the CHNL Softkey.
OR:
2)Press the FMS Knob to highlight the channel list and turn the large FMS Knob to scroll through the channels.
3) Press the CH + Softkey to go up through the list in the Channel Box, or move down the list with the CH – Softkey.
Selecting a channel directly:
1)While on the XM Radio Page, press the CHNL Softkey.
2)Press the DIR CH Softkey. The channel number in the Active Channel Box will be highlighted.
3)Press the numbered softkeys located on the bottom of the display to directly select the desired channel number.
4)Press the ENT Key to activate the selected channel.
8-50 |
Garmin G1000 Pilot’s Guide for Cessna Nav III |
190-00498-02 Rev A |
ADDITIONAL FEATURES
CATEGORY
The Category Box of the XM Radio Page displays the currently selected category of audio. Categories of channels such as jazz, rock, or news can be selected to list the available channels for a type of music or other contents. One of the optional categories is ‘PRESETS’ to view channels that have been programmed.
Selecting a category:
1)Select the CATGRY Softkey on the XM Radio Page.
2)Press the CAT + and CAT - Softkeys to cycle through the categories.
OR:
3)Turn the small FMS Knob to display the ‘Categories’ list. Highlight the desired category with the small FMS Knob and press the ENT Key. Selecting ‘All Categories’ places all channels in the list.
Figure 8-59 Categories List
190-00498-02 Rev A |
Garmin G1000 Pilot’s Guide for Cessna Nav III |
8-51 |
ADDITIONAL FEATURES
PRESETS
Up to 15 channels from any category can be assigned a preset number. The preset channels are selected by pressing the PRESETS and MORE Softkeys. Then the preset channel can be selected directly and added to the channel list for the Presets category.
Setting a preset channel number:
1)On the XM Radio Page, while listening to an Active Channel that is wanted for a preset, press the PRESETS Softkey to access the first five preset channels (PS1 - PS5).
2)Press the MORE Softkey to access the next five channels (PS6 – PS10), and again to access the last five channels (PS11 – PS15). Pressing the MORE Softkey repeatedly cycles through the preset channels.
3)Press any one of the (PS1 - PS15) softkeys to assign a number to the active channel.
4)Press the SET Softkey on the desired channel number to save the channel as a preset.
|
|
|
|
Press PRESETS to |
|
|
|
|
Access the Preset |
|
|
|
|
|
|
|
|
|
Channels Softkeys |
|
|
|
Press MORE to Cycle |
|
|
|
|
||
Press SET to |
|
Through the Preset |
||
|
||||
Save Each |
|
Channels |
||
Preset Channel |
|
|
|
Figure 8-60 Accessing and Selecting XM Preset Channels
VOLUME
Radio volume is shown as a percentage. Volume level is controlled by pressing the VOL Softkey, which brings up the MUTE Softkey and the volume increase and decrease softkeys.
Adjusting the volume:
1)With the XM Radio Page displayed, press the VOL Softkey.
2)Press the VOL – Softkey to reduce volume or press the VOL + Softkey to increase volume. (Once the VOL Softkey is pressed, the volume can also be adjusted using the small FMS Knob.)
3)Press the MUTE Softkey to mute the audio. Press the MUTE Softkey again to un-mute the audio.
Figure 8-61 Volume Control
8-52 |
Garmin G1000 Pilot’s Guide for Cessna Nav III |
190-00498-02 Rev A |