vk.com/club152685050 | vk.com/id446425943

Further Improvements

Figure 4.7: Static Temperature at x=0.01, 0.02, and 0.03 m

4.5. Summary

In this tutorial, periodic flow and heat transfer in a staggered tube bank were modeled in ANSYS Fluent. The model was set up assuming a known mass flow through the tube bank and constant wall temperatures. Due to the periodic nature of the flow and symmetry of the geometry, only a small piece of the full geometry was modeled. In addition, the tube bank configuration lent itself to the use of a hybrid mesh with quadrilateral cells around the tubes and triangles elsewhere.

The Periodic Conditions dialog box makes it easy to run this type of model with a variety of operating conditions. For example, different flow rates (and hence different Reynolds numbers) can be studied,

or a different inlet bulk temperature can be imposed. The resulting solution can then be examined to extract the pressure drop per tube row and overall Nusselt number for a range of Reynolds numbers.

For additional details about modeling periodic heat transfer, see the Fluent User's Guide.

4.6. Further Improvements

This tutorial guides you through the steps to reach an initial solution. You may be able to obtain a more accurate solution by adapting the mesh. Mesh adaption can also ensure that the solution is independent of the mesh. These steps are demonstrated in Fluid Flow and Heat Transfer in a Mixing Elbow (p. 35).

Release 2019 R1 - © ANSYS,Inc.All rights reserved.- Contains proprietary and confidential information
of ANSYS, Inc. and its subsidiaries and affiliates.	165

vk.com/club152685050 | vk.com/id446425943

	Release 2019 R1 - © ANSYS,Inc.All rights reserved.- Contains proprietary and confidential information
166	of ANSYS, Inc. and its subsidiaries and affiliates.