Ä		AP-BODY 23 - 107

REAR SEAT BACK INSTALLATION

Reverse the preceding operation.

SEAT BACK BOLSTER CUSHION REMOVAL (FIG. 37)

(1)Remove rear seat cushion and back as neces-

sary.

(2)Remove bolts holding outboard seat back bolster to quarter panel.

(3)Lift bolster upward to disengage hook retainer on back of bolster and separate from vehicle.

SEAT BACK BOLSTER CUSHION INSTALLATION

Reverse the preceding operation

Fig. 37 Rear Seat Back and Bolster

FRONT CENTER CONSOLE

REMOVAL (FIG. 38)

(1)Position front seats full forward.

(2)Remove gear selector knob and PRNDL on vehicles with automatic transaxle. Remove illumination lamp socket and position socket out of the way.

(3)Lift gear shift boot adapter from console and push adapter through opening in console on vehicles with manual transaxle.

(4)Remove bolts holding arm rest riser to floor bracket.

(5)Separate rear console from floor and remove from vehicle.

(6)Position front seats full rearward.

(7)Remove radio bezel from instrument panel. Refer to Group 8E, Instrument Panel. Remove screws holding console to instrument panel.

(8)Remove screws holding forward console to lower instrument panel rail.

(9)Remove screws holding forward console to forward brace.

(10)Separate forward console from vehicle.

INSTALLATION

Reverse the preceding operation. Verify PRNDL adjustment before returning vehicle to use.

Fig. 38 Front Center Console

FLOOR CARPET

REMOVAL (FIG. 39)

(1)Remove cowl trim panels and scuff plates.

(2)Remove front seats and inboard seat belts.

(3)Remove center arm rest and front console.

(4)Remove outboard seat belt lower attaching

bolts.

(5)Remove rear seat cushion.

(6)Pull carpet from under B-pillar trim covers.

(7)Fold carpet and remove through front door opening.

INSTALLATION

Reverse the preceding operation.

OVERHEAD CONSOLE

REMOVAL (FIG. 40)

(1)Remove screws holding overhead console to reinforcement bracket.

(2)Slide overhead console rearward to separate reinforcement bracket retainer tab from console.

(3)Lower console from roof and disconnect wire connectors.