23 - 132 AY-BODY		Ä

Fig. 12 Front Door Assembly

(4) Remove bolts holding hinge to hinge pillar and separate hinge form vehicle.

FRONT DOOR HINGE INSTALLATION

Reverse the preceding operation. Align door to achieve 6 mm (0.240 in.) gap to all surrounding panels and flush across gaps.

OUTSIDE DOOR HANDLE

REMOVAL (FIG. 13)

(1)Remove door trim panel.

(2)Remove silencer pad and water shield as neces-

sary.

(3)Raise door glass to up position.

(4)Disconnect illuminated entry wire connector from outside door handle assembly, if equipped.

(5)Disconnect latch release linkage from latch assembly.

(6)Disconnect lock cylinder linkage from latch assembly.

(7)Remove nuts holding outside handle bracket to door panel and separate bracket from panel.

(8)Position linkage rods parallel to the back of handle and remove handle assembly from door.

INSTALLATION

Reverse the preceding operation.

FRONT DOOR LATCH

REMOVAL (FIG. 14)

(1)Remove door trim panel.

(2)Remove silencer pad and water shield as neces-

sary.

(3)Disconnect linkage rods from door latch assem-

bly.

(4)Remove screws holding latch door end frame.

(5)Separate latch from door.

Fig. 13 Front Door Handle Assembly

INSTALLATION

Reverse the preceding operation.

Fig. 14 Front Door Latch Assembly

FRONT DOOR WINDOW REGULATOR

REMOVAL (FIG. 15 OR 16)

MANUAL OR ELECTRIC

(1)Remove front door trim panel.

(2)Remove silencer pad and water shield.

(3)Remove side view mirror trim cover and door frame trim moulding.