Ä

REAR SEAT BELTS

REAR OUTBOARD SHOULDER HARNESS/LAP BELT REMOVAL (FIG. 27)

(1)Remove lower and upper quarter trim panel.

(2)Remove bolt holding lap belt anchor to floor at wheelhouse kickup.

(3)Remove bolt holding seat belt retractor to quarter panel.

REAR OUTBOARD SHOULDER HARNESS/LAP BELT INSTALLATION

Reverse the preceding operation.

REAR INBOARD BUCKLE REMOVAL (FIG. 27)

(1)Lift seat belt buckle anchor cover to expose bolt.

(2)Remove bolt holding inboard buckle/center occupant belt to seat frame.

(3)Separate buckle from vehicle.

REAR INBOARD BUCKLE INSTALLATION

Reverse the preceding operation.

Fig. 27 Rear Seat Belts

FRONT SEATS

REMOVAL (FIG. 28 OR 29)

(1)Position seat full forward.

(2)Remove screws holding rear track riser covers and separate covers from tracks.

(3)On power seat track, remove outboard track

cover.

(4)Remove nuts holding seat track to floor.

(5)Position seat full rearward.

(6)On power seat track, remove door sill scuff plate and disconnect wire connector.

AG-BODY 23 - 63

(7)Remove bolts holding seat track to cross mem-

ber.

(8)Remove seat from vehicle.

INSTALLATION

Reverse the preceding operation.

Fig. 28 Manual Front Seat

Fig. 29 Power Front Seat

REAR SEATS

REMOVAL (FIG. 30)

(1)Hinge seat backs forward.

(2)Remove bolts holding rear seat frame to floor on sides of center floor hump near luggage compartment kick-up.

(3)Pull seat forward to disengage retaining hooks from floor.

(4)Separate seat from vehicle.