Добавил:
Upload Опубликованный материал нарушает ваши авторские права? Сообщите нам.
Вуз: Предмет: Файл:
FWD / 92FWD_23.PDF
Источник:
Скачиваний:
56
Добавлен:
19.03.2015
Размер:
5.12 Mб
Скачать

Ä

 

AP/27 CONVERTIBLE 23 - 115

 

(8)Tip bow toward interior of vehicle and away from top cover.

(9)Lower convertible top enough to allow to loosen around fourth roof bow.

(10)Locate feature strip insert at end of bow. Slide feature strip to the side and separate strip from bow. Do not damage foam filler strips attached to fourth bow.

(11)Separate top cover from fourth roof bow.

(12)Remove rivets holding rear window retainer to fourth roof bow.

(13)Separate retainer from bow.

(14)Mark location of stay pads and rear window zipper apron to aid installation.

(15)Remove staples holding stay pads to fourth roof bow.

(16)Remove staples holding rear window zipper apron to fourth roof bow.

(17)Remove staples holding side stay pads to fourth roof bow.

(18)Separate fourth roof bow from vehicle.

INSTALLATION

Reverse the preceding operation.

Fig. 11 Fourth Roof Bow

FORWARD ROOF RAIL

REMOVAL

(1)Lower convertible top and remove top header trim cover.

(2)Remove screws holding pivot bracket to forward roof rail.

(3)Remove bolt, washer and bushing holding center link arm to forward roof rail.

(4)Remove bolt, washer and bushing holding control link arm to forward roof rail.

(5)Separate forward roof rail from frame.

INSTALLATION

Reverse the preceding operation.

Fig. 12 Roof Rails and Linkage

ROOF LINKAGE

REMOVAL (FIG. 12)

(1)Disengage top header latches.

(2)Remove bolt, washer and bushing holding balance link arm to control link.

(3)Remove bolt, washer and bushing holding balance link arm to rear roof rail behind quarter trim link.

(4)Separate balance link arm from vehicle.

INSTALLATION

Reverse the preceding operation.

REAR ROOF RAIL

REMOVAL (FIG. 13)

(1)Remove quarter trim panel.

(2)Disengage top latches, do not lower top.

(3)Remove quarter glass and weatherstrip.

(4)Loosen bolts holding rear roof rail main pivot plate to quarter panel.

(5)Remove clip and clevis pin holding gas assist cylinder to rear roof rail.

(6)Remove fourth roof bow slat spring.

(7)Remove pivot bolt holding slat to rear roof rail.

(8)Remove pivot bolt holding center link to rear roof rail.

(9)Remove bolts holding third roof bow to rear roof

rail.

(10)Remove pivot bolt holding rear roof rail to main pivot bracket.

(11)Separate rear roof rail from roof frame.

INSTALLATION

Reverse the preceding operation.

Соседние файлы в папке FWD