Добавил:
Upload Опубликованный материал нарушает ваши авторские права? Сообщите нам.
Вуз: Предмет: Файл:
FWD / 92FWD_23.PDF
Источник:
Скачиваний:
56
Добавлен:
19.03.2015
Размер:
5.12 Mб
Скачать

Ä

 

AJ-BODY 23 - 73

 

Fig. 4 Hood Latch AssemblyÐTypical

HOOD LATCH RELEASE CABLE

INSTALLATION

Reverse the preceding operation.

COWL COVER

REMOVAL (FIG. 5)

(1)Raise hood to full up position.

(2)Disconnect windshield washer hoses from wiper

arms.

(3)Remove windshield wiper arm assemblies. Refer to Group 8K, Windshield Wiper and Washer Systems.

(4)Remove plastic expanding type fasteners holding cowl cover to cowl, below windshield.

(5)Lift back of cowl cover and slide cover rearward from under dash panel to hood seal and separate cover from vehicle.

INSTALLATION

Reverse the preceding operation.

FRONT END SPLASH SHIELDS

FRONT WHEELHOUSE SPLASH SHIELD REMOVAL (FIG. 6)

(1)Hoist vehicle and support on suitable safety stands.

(2)Remove front wheel assembly.

(3)Remove push-in fasteners holding front wheelhouse splash shield to fender opening lip and inner wheelhouse area.

(4)Separate wheelhouse splash shield from vehicle.

Fig. 5 Cowl Cover Assembly

FRONT WHEELHOUSE SPLASH SHIELD INSTALLATION

Reverse the preceding operation.

TRANSAXLE SPLASH SHIELD REMOVAL (FIG. 6)

(1)Remove one front wheelhouse splash shield push-in fastener and separate wheelhouse splash shield from transaxle splash shield.

(2)Remove transaxle splash shield attaching bolts and separate transaxle splash shield from vehicle.

TRANSAXLE SPLASH SHIELD INSTALLATION

Reverse the preceding operation.

Fig. 6 Front Wheelhouse and Transaxle Splash

ShieldsÐTypical

ENGINE DRIVE BELT SPLASH SHIELD REMOVAL (FIG. 7)

(1)Hoist vehicle and support on suitable safety stands.

(2)Remove bolts holding engine drive belt splash shield to right frame rail.

(3)Separate drive belt splash shield from vehicle.

Соседние файлы в папке FWD