Добавил:
Upload Опубликованный материал нарушает ваши авторские права? Сообщите нам.
Вуз: Предмет: Файл:
FWD / 92FWD_23.PDF
Источник:
Скачиваний:
56
Добавлен:
19.03.2015
Размер:
5.12 Mб
Скачать

Ä

 

AG-BODY 23 - 69

 

Fig. 43 Lift Gate Lock Cylinder

LIFT GATE AND FUEL FILL DOOR RELEASE CABLES

LIFT GATE AND FUEL FILL DOOR CABLES REMOVAL (FIG. 45)

(1)Remove interior trim as necessary to gain access to release cables.

(2)Remove left front door opening scuff plate.

(3)Remove screw holding trim cover to release cable handle and separate cover from handle.

(4)Remove screw holding release handle to door

sill.

(5)Pry open retainer tab holding cable core end in handle pivot. Pry cable case end from handle.

(6)On fuel fill door cable, remove nut holding cable latch to fuel fill opening.

Fig. 44 Fuel Fill Door

(7) On lift gate latch, remove lift gate latch cover and disconnect cable end from latch. Route cable back through trunk lid.

LIFT GATE AND FUEL FILL DOOR CABLES INSTALLATION

Reverse the preceding operation.

TAIL LAMP CLOSURE PANEL

REMOVAL

(1)Remove lift gate opening scuff plate.

(2)Remove lift gate opening sill cover.

(3)Remove luggage compartment tail panel trim.

(4)Remove lower quarter trim panels.

(5)Remove bolt holding quarter panel spoiler to tail lamp closure panel, if equipped.

Fig. 45 Lift Gate and Fuel Fill Door Release Cables

23 - 70 AG-BODY

(6)Remove tail lamps and license plate lamps, refer to Group 8L, Lamps for proper procedures.

(7)Remove nuts holding tail lamp closure panel to tail panel.

(8)Remove nuts holding tail lamp closure panel to quarter panel ends.

(9)Separate tail lamp closure panel from vehicle.

INSTALLATION

Reverse the preceding operation.

Ä

Fig. 46 Tail Lamp Closure Panel

Соседние файлы в папке FWD