Ä

Fig. 42 Manual Front Seat

Fig. 43 Power Front Seat

REAR SEAT BACK REMOVAL (FIG. 44)

(1)Hinge seat back forward and disengage push-in fasteners holding carpet backing to trunk floor.

(2)Remove bolts holding outboard hinge pivot bracket to seat back.

(3)Pull seat back outward to disengage inboard pivot and separate from vehicle.

REAR SEAT BACK INSTALLATION

Reverse the preceding operation.

SEAT BACK BOLSTER CUSHION REMOVAL (FIG. 44)

(1)Remove rear seat cushion and back as neces-

sary.

(2)Remove bolts holding outboard back bolster to quarter panel.

(3)Lift bolster upward to disengage hook retainer on back of bolster and separate from vehicle.

AA-BODY 23 - 29

SEAT BACK BOLSTER CUSHION INSTALLATION

Reverse the preceding operation

Fig. 44 Rear Seat Cushion and Back

FRONT CENTER CONSOLE

REMOVAL (FIG. 45)

(1)Position front seats full forward.

(2)Remove access hole plugs on sides of center arm rest riser and remove bolts holding riser to floor bracket.

(3)Remove coin holder and remove screws holding arm rest riser to front console.

(4)Position front seats full rearward.

(5)Remove radio bezel from instrument panel. Refer to Group 8E, Instrument Panel. Remove screws holding console to instrument panel.

(6)Remove screws holding console to lower instrument panel rail.

(7)Remove screws and disengage hook and loop fastener holding carpet panels to sides of console and separate panels from console.

(8)Remove screws holding console to forward floor mounting bracket.

(9)Remove set screw holding gear selector knob to shift lever and pull knob from shifter on vehicles with automatic transaxle.

(10)Lift forward edge of PRNDL cover and separate cover from console on vehicles with automatic transaxle.

(11)Lift gear shift boot adapter from console and push adapter through opening in console on vehicles with manual transaxle.

(12)Separate console from floor and remove from vehicle.