23 - 80 AJ-BODY

Fig. 19 Center Console

FLOOR CARPET

REMOVAL (FIG. 20)

(1)Remove cowl trim panels and scuff plates.

(2)Remove front seats and inboard seat belts.

(3)Remove center arm rest and front console.

(4)Remove outboard seat belt lower attaching

bolts.

(5)Remove left dash panel foot rest.

(6)Remove rear seat cushion.

(7)Pull carpet from under quarter trim covers.

(8)Fold carpet and remove through door opening.

INSTALLATION

Reverse the preceding operation.

Fig. 20 Floor Carpet and SilencersÐTypical

Ä

OVERHEAD CONSOLE

REMOVAL (FIG. 21)

(1)Remove screws holding overhead console to reinforcement bracket.

(2)Slide overhead console rearward to separate reinforcement bracket retainer tab from console.

(3)Lower console from roof and disconnect wire connectors.

INSTALLATION

Reverse The preceding operation.

Fig. 21 Overhead ConsoleÐTypical

HEAD LINING

REMOVAL

(1)Disconnect battery negative cable.

(2)Pull dome lamp downward to disengage from retaining ring in head lining. Separate lens from lamp body and remove bulb. Separate bulb holder from lamp body. Remove attaching screw holding retaining ring to roof bow, if equipped.

(3)Remove screws holding coat hooks to roof above quarter panels.

(4)Remove roof rail and A-pillar mouldings.

(5)Remove screws holding sun visors to roof header and disconnect wire connector, if equipped. Remove inboard sun visor hangers.

(6)Remove overhead console, if equipped.

(7)Pull front reading lamp downward to disengage from retaining ring in head lining and disconnect wire connector. Remove screws holding retaining ring to roof header, if equipped.

(8)Remove pinch welt holding headlining to sun roof opening, if equipped.

(9)Remove one quarter trim panel as necessary to clear head lining removal path.

(10)Disengage hook and loop fasteners holding head lining to roof above rear window and slide head lining from behind quarter panel.

(11)Remove head lining from vehicle.