Ä		AG-BODY 23 - 59

(5)Remove nuts holding outside door latch handle to retainer bracket and separate bracket from door.

(6)Swing lock rod upward, parallel to back of latch handle, and separate latch handle from door panel.

INSTALLATION

Reverse the preceding operation.

Fig. 18 Outside Door Latch Release HandleÐTypical

INSIDE LATCH RELEASE HANDLE

REMOVAL

(1)Remove door trim panel.

(2)Remove screw holding handle to inner door panel.

(3)Disconnect linkage rod from back of handle.

(4)Separate handle from door.

INSTALLATION

Reverse the preceding operation.

POWER DOOR LOCK ACTUATOR

REMOVAL (FIG. 19)

(1)Remove door trim panel. Remove silencer and water shield as necessary.

(2)Raise door glass to the up position.

(3)Disconnect battery negative cable.

(4)Disconnect lock actuator linkage rod from door

latch.

(5)Remove bolts holding actuator to inner door panel.

(6)Separate power door lock actuator from door.

INSTALLATION

Reverse the preceding operation.

SIDE VIEW MIRROR

REMOVAL (FIG. 20)

(1)Remove door trim panel.

(2)Disconnect power mirror wire connector.

Fig. 19 Power Door Lock Actuator

(3)Remove covers to gain access to mirror attaching nuts.

(4)Remove nuts holding mirror to door frame.

(5)Separate mirror from door frame.

INSTALLATION

Reverse the preceding operation.

Fig. 20 Side View Mirror

DOOR GLASS OPENING MOULDING

REMOVAL

(1)Remove door trim panel.

(2)Remove door glass.

(3)Remove side view mirror.

(4)Disengage clips holding door glass opening moulding to the door frame (Fig. 21).

(5)Remove screws holding door glass opening moulding and belt weatherstrip to door belt flange (Fig. 22).

(6)Remove the belt weatherstrip.

(7)Remove window opening moulding.

INSTALLATION

Reverse the preceding operation.