23 - 30 AA-BODY

INSTALLATION

Reverse the preceding operation. On vehicles with automatic transaxle, verify gear selector indicator adjustment before returning vehicle to use.

Fig. 45 Front Center Console

FLOOR CARPET

REMOVAL (FIG. 46)

(1)Remove cowl trim panels and scuff plates.

(2)Remove front seats and inboard seat belts.

(3)Remove center arm rest and front console.

(4)Remove outboard seat belt lower attaching

bolts.

(5)Remove rear seat cushion.

(6)Pull carpet from under B-pillar trim covers.

(7)Fold carpet and remove through front door opening.

INSTALLATION

Reverse the preceding operation.

Fig. 46 Floor Carpet and Silencers

Ä

OVERHEAD CONSOLE

REMOVAL (FIG. 47)

(1)Remove screws holding overhead console to reinforcement bracket.

(2)Slide overhead console rearward to separate reinforcement bracket retainer tab from console.

(3)Lower console from roof and disconnect wire connectors.

INSTALLATION

Reverse The preceding operation.

Fig. 47 Overhead Console

HEAD LINING

REMOVAL (FIG. 48)

(1)Disconnect battery negative cable.

(2)Pull dome lamp downward to disengage from retaining ring in head lining. Separate lens from lamp body and remove bulb. Separate bulb holder from lamp body. Remove attaching screw holding retaining ring to roof bow.

(3)Remove screws holding coat hooks to roof above rear doors.

(4)Remove roof rail and A-pillar mouldings.

(5)Remove screws holding sun visors to roof header and disconnect wire connector, if equipped. Remove inboard sun visor hangers.

(6)Remove overhead console, if equipped.

(7)Pull front reading lamp downward to disengage from retaining ring in head lining and disconnect wire connector. Remove screws holding retaining ring to roof header.

(8)Remove pinch welt holding headlining to sun roof opening, if equipped.

(9)Remove inside rear view mirror from windshield bracket if necessary.

(10)Disengage hook and loop fasteners holding head lining to roof above rear window and slide head lining forward about 25 mm (1 in.).