Добавил:
Upload Опубликованный материал нарушает ваши авторские права? Сообщите нам.
Вуз: Предмет: Файл:
FWD / 92FWD_23.PDF
Источник:
Скачиваний:
56
Добавлен:
19.03.2015
Размер:
5.12 Mб
Скачать

Ä

APPLIQUE MOULDING AND RETAINER REMOVAL

(1)Remove screws holding applique to rocker panel from under vehicle.

(2)Lift applique upward to separate from retaining channel.

(3)Remove pop-rivets holding retainer to rocker panel using a suitable drill.

APPLIQUE MOULDING AND RETAINER INSTALLATION

(1)Install applique retainer on rocker panel with pop-rivets. Paint or undercoat bare metal surfaces to avoid rust.

(2)Hook top of applique over retainer channel and install screws under rocker panel.

COWL PANEL TRIM AND SCUFF PLATES

COWL PANEL AND DOOR OPENING SCUFF PLATE REMOVAL (FIG. 30 OR 31)

(1)Open front door.

(2)Remove screw holding trim panel to cowl forward of the front door opening.

(3)Remove screws holding scuff plate to door sill.

(4)Separate cowl panel trim and scuff plate from vehicle.

AP-BODY 23 - 103

COWL PANEL AND DOOR OPENING SCUFF PLATE INSTALLATION

Reverse the preceding operation.

A-PILLAR AND ROOF RAIL MOULDINGS

A-PILLAR MOULDING REMOVAL (FIG. 30 OR 31)

(1)Open front door.

(2)Disengage clips holding A-pillar moulding to roof rail above door opening.

(3)Slide A-pillar moulding upward and pull rearward to separate moulding from A-pillar.

A-PILLAR MOULDING INSTALLATION

Reverse the preceding operation.

REAR DOOR ROOF RAIL MOULDING REMOVALÐAP-44 BODY (FIG. 30)

(1)Open rear door.

(2)Disengage clips holding roof rail moulding to roof rail above rear door opening.

(3)Separate moulding from vehicle.

REAR DOOR ROOF RAIL MOULDING INSTALLATIONÐAP-44 BODY

Reverse the preceding operation.

Fig. 30 Interior Mouldings, Panels, and Trim CoversÐAP-44 Body

23 - 104 AP-BODY

B-PILLAR TRIM PANELÐAP-44 Body

REMOVAL (FIG. 30)

(1)Remove roof rail mouldings and scuff plates as necessary.

(2)Remove shoulder harness turning loop cover. Remove bolt holding turning loop to B-pillar.

(3)Remove bolt holding seat belt to floor below B-pillar.

(4)Lift B-pillar trim off door opening sill weatherstrips and push inward.

(5)Slide B-pillar trim downward as far as possible and separate trim from B-pillar.

INSTALLATION

Reverse the preceding operation.

UPPER QUARTER TRIM PANELÐAP-44 BODY

REMOVAL (FIG. 30)

(1)Remove roof rail mouldings as necessary.

(2)Remove shoulder harness turning loop cover. Remove bolt holding turning loop to quarter panel.

(3)Remove rear seat as necessary to gain access to quarter trim fasteners.

(4)Remove screws holding rear header moulding to roof as necessary to clear quarter removal path.

Ä

(5)Remove screws holding upper quarter trim panel to quarter panel.

(6)Disengage hook and loop fastener holding trim to quarter panel.

(7)Pull trim panel forward and separate from ve-

hicle.

INSTALLATION

Reverse the preceding operation.

LOWER QUARTER TRIM PANELÐAP-44 BODY

REMOVAL (FIG. 30)

(1)Open rear door.

(2)Remove rear seat as necessary to gain access to quarter trim fasteners.

(3)Remove screw holding lower quarter trim panel to quarter panel.

(4)Separate lower quarter trim panel from vehicle.

INSTALLATION

Reverse the preceding operation.

QUARTER TRIM PANELÐAP-44 BODY

REMOVAL (FIG. 31)

(1) Remove roof rail mouldings and scuff plates as necessary.

Fig. 31 Interior Mouldings, Panels, and Trim CoversÐAP-24 Body

Соседние файлы в папке FWD