23 - 120 AP/27 CONVERTIBLE		Ä

Fig. 19 Door Glass Frame Cap

Fig. 20 Division Channel Bolts

FRONT DOOR STATIONARY GLASS AND DIVISION CHANNEL

REMOVAL

(1)Remove front door glass.

(2)Drill out rivets holding division channel to door frame (Fig. 22).

(3)Separate division channel from stationary glass and remove glass from door (Fig. 23).

(4)Lift division channel upward, out of the door.

(5)Pull the stationary glass weatherstrip from the division channel.

Fig. 21 Front Door Glass

INSTALLATION

Install the division channel weatherstrip on the stationary glass. Position the glass in the door frame and reverse the removal operation.

Fig. 22 Pop-rivet Removal

FRONT DOOR STATIONARY GLASS CHANNEL WEATHERSTRIP

REMOVAL

(1)Remove stationary glass.

(2)Pull weatherstrip from door frame channel (Fig.

24).

INSTALLATION

Loosen outside rear view mirror if necessary, and reverse the removal operation.