Добавил:
Upload Опубликованный материал нарушает ваши авторские права? Сообщите нам.
Вуз: Предмет: Файл:
FWD / 92FWD_23.PDF
Источник:
Скачиваний:
56
Добавлен:
19.03.2015
Размер:
5.12 Mб
Скачать

23 - 128 AY-BODY

HOOD ORNAMENT AY/P-S

REMOVAL (FIG. 2)

(1)Remove grille.

(2)Locate hood ornament spring under grille opening panel header.

(3)Compress hood ornament spring enough to clear hooks on end of retaining wire.

(4)Squeeze retainer wire hooks together and push hooks inside spring.

(5)Rotate spring counterclockwise to separate spring from retainer.

(6)Separate hood ornament from grille opening panel.

INSTALLATION

Reverse the preceding operation.

GRILLE OPENING PANEL AY/P BODY

For service procedures for headlamp related components refer to Group 8L, Lamps.

REMOVAL (FIG. 3)

(1)Remove front bumper and grille.

(2)Remove front end splash shields as necessary to gain access to behind fenders.

(3)Remove nuts holding GOP mouldings to front fenders.

(4)Remove nuts holding grille opening panel to front fenders.

(6)Disconnect concealed headlamp motor wire connector.

(7)Disconnect all lamp wire connectors.

(8)Remove bolts holding grille opening panel to radiator closure panel and center brace.

(9)Separate grille opening panel from vehicle.

INSTALLATION

Reverse the preceding operation.

Fig. 3 Grille Opening PanelÐAY/P Body

Ä

GRILLE OPENING PANEL AY/S BODY

For service procedures for headlamp related components refer to Group 8L, Lamps.

REMOVAL (FIG. 4)

(1)Remove front bumper and grille.

(2)Remove front end splash shields as necessary to gain access to behind fenders.

(3)Remove nuts holding mouldings to front fend-

ers.

(4)Remove bolts holding mouldings to bottom of grille opening panel and separate mouldings from vehicle.

(5)Remove nuts holding grille opening panel to front fenders.

(6)Disconnect concealed headlamp motor wire connector.

(7)Disconnect headlamp wire connectors.

(8)Remove bolts holding grille opening panel to radiator closure panel mount brackets and center brace.

(9)Separate grille opening panel from vehicle.

INSTALLATION

Reverse the preceding operation.

Fig. 4 Grille Opening PanelÐAY/S Body

HOOD AND HINGES

HOOD REMOVAL (FIG. 5)

(1)Raise hood to full up position.

(2)Lift front edge of cowl cover on the right side of the windshield washer bottle and disconnect the under hood lamp wire connector.

(3)Mark all bolt and hinge attachment locations with a grease pencil or other suitable device to provide reference marks for installation. When installing hood, align all marks and secure bolts. The hood should be aligned to 4 mm (0.160 in.) gap to the front fenders and flush across the top surfaces along fenders.

Соседние файлы в папке FWD